Defects are considered as one of the wastes in manufacturing systems that negatively affect the delivery times, cost and quality of products leading to manufacturing companies facing a critical situation with the customers and to not comply with the IPC-A-610E standard for the acceptability of electronic components. This is the case is a manufacturing company located in Tijuana, Mexico. Due to an increasing demand on the products manufactured by this company, several defects have been detected in the welding process of electronic boards, as well as in the components named Thru-Holes. It is for this reason that this paper presents a lean manufacturing application case study. The objective of this research is to reduce at least 20% the defects that are generated during the welding process. In addition, it is intended to increase 20% the capacity of three double production lines where electronic boards are processed. As method, the Plan-Do-Check-Act (PDCA) cycle, is applied. The Pareto charts and the flowchart are used as support tools. As results, defects decreased 65%, 79%, and 77% in three analyzed product models. As conclusion, the PDCA cycle, the Pareto charts, and the flowchart are excellent quality tools that help to decrease the number of defective components.

The COVID-19 pandemic and the quarantine period determined that university students (human resource) in Mexico had adopted the online class modality, which required them to adapt themselves to new technologies and environmental conditions that are different from classrooms at their university. Specifically, these new environmental conditions can be uncomfortable and have an impact on the students’ academic performance. Consequently, the present study aims to determine the impact that the lighting, noise, and temperature levels (independent variables) have on academic performance (dependent variable) in university students during the COVID-19 pandemic. To do this, a questionnaire was developed, which was applied to 206 university students online, and a structural equation model was built that integrates the four variables through three hypotheses, which were statistically validated through the partial least squares method. Results showed that temperature, lighting, and noise have significant direct effects on university students’ academic performance. As a conclusion, it was obtained that the three independent variables have an impact in the sustainability of university students (human resource).

Poor workstation designs represent a risk factor for operators in assembly production lines. Anthropometric design of workstations facilitates the sustainable development of the workplace. This paper proposes a novel integrated approach about work standardization and anthropometric workstation design as a strategy to increase human factor performance as well as the productivity index in manufacturing companies. The integrating approach is presented through a case study in a publishing press company with operators who perform manual and mechanical tasks in production lines in the box assembly department. Currently, the company’s production capacity is below demand, and in order to satisfy customers’ requirements, the company pays a lot of overtime to operators. In order to solve this problem, the integrated approach was applied. The findings indicated that inefficient movements and body postures in operators decreased from 230 to 78, and the standard time was reduced from 244 to 199 s for each assembled box. In addition, the production rate increased by 229 units per assembly line per day, and overtime was eliminated. Therefore, the novel integrated approach allows the increase of sustainability in the company and the operators’ well-being by making a better use of the human factor, eliminating overtime, and increasing production capacity.

This paper reports a case study using a standardization process for increasing efficiency and a better optimization of resources in a printing company with 150 operators having manual and mechanical tasks in the box assembly department along with four production lines. The current capacity is 350 boxes per day, while the demand is 650 units, where the company is expected to pay large sums for overtime. Using work standardization, studying worker movements, timing, and workstations redesign, the main goal was to increase the efficiency and productivity indexes. After applying those tools, the inefficient movements in operators decreased from 230 to 78, eliminating 66% of the unnecessary movements, as well as the standard time in a workstation decreased from 244 to 199 s (18.44%) per each assembled box, and the production rate increased by 63.2%, that is, 229 units per assembly line a day, where overtime was reduced to zero.

Waste from raw materials has a direct influence on the final price of a product. However, since waste has no added value to products, customers are unwilling to pay for it. Reducing waste along the production process and supply chain allows companies to decrease costs and remain competitive in product prices. This research is conducted in a medical device manufacturing company located in Tijuana (Mexico). The company found a negative variation in part number 9540, a metallic foil used for hot stamping. During inventory cycle counts, the company found that they were purchasing rawer material than necessary due to a 50% of waste generated along the production process. We implemented two process improvement methodologies, namely Practical Process Improvement (PPI) and the Plan-Do-Check-Act model, to eliminate 100% of the raw material waste, specifically regarding the foil’s waste. The improvement project comprised two phases: a) adjusting the parameters of the hot foil stamping machine and b) replacing the hot foil stamping machine with a pad printing machine. In our research, the PPI methodology is presented in 8 detailed stages as a simple problem-solving method, in contrast with five stages reported in other documented cases. This case study presents how a company can apply continuous improvement programs and its managerial implications, even without having a structured and defined systems for quality, such as Six Sigma or Lean Manufacturing implemented. After the two implementation phases, the improvement project led to economic savings of $\$ $ 165,000 in a year.

Defects are considered one of the wastes in manufacturing systems that negatively affect the delivery times, cost and quality of products leading to manufacturing companies facing a critical situation with the customers and to not comply with the IPC-A-610E standard for the acceptability of electronic components. This is the case is a manufacturing company located in Tijuana, Mexico. Due to an increasing demand on the products manufactured by this company, several defects have been detected in the welding process of electronic boards, as well as in the components named Thru-Holes. It is for this reason that this paper presents a lean manufacturing application case study. The objective of this research is to reduce at least 20% the defects generated during the welding process. In addition, it is intended to increase 20% the capacity of 3 double production lines where electronic boards are processed. As method, the PDCA cycle, is applied. The Pareto charts and the flowchart are used as support tools. As results, defects decreased 65%, 79% and 77% in three analyzed product models. As conclusion, the PDCA cycle, the Pareto charts, and the flowchart are excellent quality tools that help decrease the number of defective components.