Settakorn Upasen

Dr. Settakorn Upasen

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2018 in Heliyon
Verified
Journal Article
Open access
SUSettakorn Upasen
Settakorn Upasen
PWPiyachat Wattanachai
Piyachat Wattanachai
This research studied various types of packaging to prolong the shelf life of non-preservative white bread. Three types of blown film packages were used, i.e. a single LDPE layer incorporated with an oxygen scavenger, a single LDPE layer containing an oxygen absorber sachet, and three layers of LDPE laminated with O-nylon. The effects of modified packaging atmosphere, i.e. 5, 10, and 21 vol. % of oxygen in nitrogen balance, on the shelf life was also included. Characterization of the packaging films was carried out using several techniques, such as Oxygen Transmission Rate (OTR) and an optical microscopy. Headspace gases, microbial count, as well as physical appearance were used to evaluate the shelf life. The optical microscopic images showed that incorporating the oxygen scavenger into the plastic film produced small pores, contributing to a passive function of the films as their OTRs were significantly enhanced. However, the microbial growth on bread stored in those packages was suppressed, implying that the intermediate generated from scavenging reaction might act as a fungistatic. Even though the scavenging capability of the oxygen absorber sachet lasted only for 4 days, the fungi and mould development thereafter was still lower compared to the package without the sachet. The prolonging white bread shelf life was found to be primarily dependent on two factors. The package with a high oxygen barrier such three-layer films defeated microorganisms. With a low initial oxygen level of around 5% by volume, the bread shelf life could be prolonged up to 5-7 days.

23 December 2022 in Biomass Conversion and Biorefinery
Verified
Journal Article
Closed access
PDF file
SSS. Soisuwan
S. Soisuwan
PBP. Boonruam
P. Boonruam
PWP. Wattanachai
P. Wattanachai
HMH. Morillas
H. Morillas
JPJ. Panpranot
J. Panpranot
SUSettakorn Upasen
Settakorn Upasen

22 October 2018 in Proceedings
Verified
Conference Paper
Open access
PDF file
PBPatiparn Boonruam
Patiparn Boonruam
PWPiyachat Wattanachai
Piyachat Wattanachai
SUSettakorn Upasen
Settakorn Upasen
In this research, we studied the chlorinated gas adsorption process using activated carbon. Two types of granular activated carbon were employed: GAC800 and GAC1200; with specific surface areas of 800 m2/g and 1200 m2/g, respectively. In order to optimize the polyvinyl chloride (PVC) dehydrochlorination conditions, three parameters were studied: (i) the type of precursor—PVC and PVC mixed with charcoal (1:1 by weight)—(ii) the temperature—300 and 400 °C—and (iii) the retention time—30, 120, and 240 min. Mohr’s method and acid-base titration were used to estimate the captured amount of chlorinated gas. The results indicated that the PVC dehydrochlorination occurred completely about 69–73 wt.% at 400 °C for 240 min. The amount of chloride ion was detected around 1–2 mmol/LNaOH. The estimated HCl adsorption capacity for the GAC800 and GAC1200 samples potentially absorbed 0.27 mgHCl/gGAC and 0.21 mgHCl/gGAC, respectively. In addition, the efficiency for GAC800 and GAC1200 was reported to 37.95% and 28.92%, respectively.

1 April 2026
Verified
Thesis
Closed access
SUSettakorn Upasen
Settakorn Upasen
Stabilité chimique et structurale de pérovskites céramiques de conductrice protoniques pour piles à combustible et électrolyseurs: La stabilité structurale et chimique de céramiques bien densifiées candidates pour leur utilisation comme électrolyte ou matériau d'électrode de piles à combustible, électrolyseur H2/air ou même de convertisseur CO2/Hydrocarbures a été étudiée vis-à-vis de l'eau sous pression (autoclave, eau pauvre ou saturée en CO2). La pressurisation maximise l'efficacité des dispositifs. Quatre familles de pérovskites ont été considérées: BaCe0.4Zr0.5Y0.1Zn0.04O3- (BCZYZ), SrZr0.9Er0.1O3- (SZE), Ln2NiO4+ (LNO, Ln = La, Pr, Nd), and La0.6Sr0.4Co0.2Fe0.8O3- (LSCF6428). Les céramiques denses sont traitées à 550°C en autoclave plusieurs jours à plusieurs semaines, soit dans des conditions de fonctionnement ( 20 bar, eau sans CO2, 550°C), soit en vieillissement accéléré ( 40 bar eau sans ou saturée de CO2, 550°C). Les céramiques ont été analysées avant et après 'protonation' par Microscopie Optique, Thermogravimétrie, Expansion Thermique, (micro/macro) ATR FTIR, Raman micro-Spectroscopie, diffraction des rayons X et des neutrons. En condition de fonctionnement ( 20 bar), la stabilité des matériaux d'électrodes LNO/LSCF6428 et de l'électrolyte SZE est bonne, alors que la céramique BCZYZ se corrode. La céramique LSFC6428 soumis à des conditions sévères (eau saturée en CO2, 40 bar) est 5 à 30 fois moins corrodée que les composés LNO and SZE. La corrosion s'initie en surface, aux joints de grains. La protonation modifie plus ou moins la symétrie, le volume et les paramètres de la maille unitaire ainsi que les transitions de phase en relation avec la modification de la distribution/organisation des lacunes d'oxygène. Le niveau de dopage en proton des différents matériaux est aussi discuté.