While the wood Caesalpinia echinata (pernambuco wood) is traditionally used in the manufacture of bows for string instruments, wood of other genera such as Handroanthus (syn. Tabebuia) and Manilkara are also used in bow making, but still on a very small scale. This study aims to evaluate the anatomical, chemical, physical, mechanical, and acoustic characteristics of these two latter woods, establishing their potential for bow making. Length, frequency of vessel elements and rays, and the higher percentage of fibers influence the density, modulus of elasticity, modulus of rupture, and the speed of sound propagation, whereas the content of lignin influence the sticks’ stiffness. It appears that Handroanthus bows can provide quality equivalent to that of pernambuco wood. Despite its appropriate heartwood color and texture, Manilkara provides bows of inferior quality.
The potential commercial use of Brazilian-grown Eucalyptus propinqua for furniture and other applications has been largely ignored in favour of native woods. In part, this results from unfamiliarity with the properties of this species, especially in mature trees. To address this gap in our knowledge, we have characterised the wood anatomy, physical and mechanical properties, and chemical constituents in the radial direction of five E. propinqua trees sampled at breast height. The anatomical features follow the typical radial pattern, which includes differences in juvenile wood when compared with mature wood. Basic density peaked in samples formed 17–30 years from the pith before decreasing at ages 38–45 years (a decline reflecting the low extractive content of the sapwood). We did not observe a pattern of radial variation in mechanical properties. Extractive content increased up to 25–30 years of age and then decreased significantly at 38–45 years with values similar to those of the wood from the sample close to the pith, while the holocellulose content presented inverse behaviour. The lignin content did not change radially. We concluded that many features of E. propinqua wood vary radially, as with many other species of the Eucalyptus genus. This variation, however, was not evident in important mechanical properties and was muted in others. The quality of the wood makes it suitable for many applications, especially after some 17 years of age when ‘mature’ wood, indicated by a declining (and non-significant) rate of increase in fibre and vessel length, is first produced.
The wood anatomy of the root, stem (base, middle, top) and branch of Anadenanthera peregrina, Copaifera langsdorffii, Handroanthus ochraceus, Ocotea corymbosa and Xylopia aromatica growing naturally in the Brazilian Cerrado is investigated. The important findings are correlated with hydraulic architecture and mechanical requirements. The presence of hydraulic bottlenecks (also referred to as hydraulic constrictions) is evident in the transition from root to stem, but no such transition is observed from stem to branch in other four species except for Xylopia aromatica. Compared with solitary vessels, proportion of multiple vessels is higher in the roots of Anadenanthera peregrina and Copaifera langsdorffii, as well as in the roots and stem-base of Xylopia aromatica indicating a tendency toward higher safety of roots from embolism as compared to the stem. Dimensions of rays, fibers and dry biomass percentage did not clearly show variations in these cells to influence the mechanical strength. Besides reducing hydraulic conductivity, decrease in vessel diameter from the root to the stem base may also impact mechanical strength by reducing empty spaces (vessel lumen). We concluded that the wood of the stem base of the species investigated shows mechanism to safeguard from air embolism by producing narrower vessels, which can protect the main stem from constant loss of conductivity.
23 October 2021 in Research, Society and Development
Worldwide, Tectona grandis (teak) is recognized for its productivity and the quality of its wood. The Brazilian market is already seen as a great potential for consumption and production of teak wood. Therefore, the objective of this work was to characterize the teak wood grown in Brazil through a bibliographic survey of the results already available. In general, it was found that the teak wood planted in Brazil has a certain variability in its technological properties, and these variations are due to the origin, genetic material, age, planting location and the cycle used in the management of the forest. In a way, we still do not have much research on the quality of teak wood, and it would be important to implement research programs and experiments that consider the different genetic materials, growing environments, planting spacing, silvicultural tracts and ages of cutting, to allow greater knowledge about the growth and the factors that can influence the quality of the wood to be produced.
O presente trabalho teve como objetivo determinar os índices de qualidade para papel e celulose com base nas características das fibras de Eucalyptus pellita e E. tereticornis. O incremento médio anual (IMA) foi calculado com a medida do DAP e Altura (aos 25 anos), um disco de 10 cm da cada árvore foi colhido para as determinações da densidade e estudos anatômicos. A altura da árvore, o diâmetro do tronco a 1,30 m de altura (DAP) e o volume por árvore foram maiores em E. pellita quando comparados a E. tereticornis. O volume por hectare e o incremento médio anual foram maiores em E. tereticornis em comparação com E. pellita. Com base nos índices calculados a partir das dimensões das fibras, não observamos variação no coeficiente de flexibilidade entre as duas espécies; entretanto, esse índice foi mais heterogêneo com o menor valor na medula de E. tereticornis. Eucalyptus pellita apresentou menor valor de fração de parede, incluindo menor valor geral na medula. O índice de Runkel foi o mais baixo em E. pellita; além disso, o valor mais alto, acima de 1, foi encontrado na posição medular de E. tereticornis. O índice de esbeltez não diferiu entre as espécies não sendo possível detectar qual obteve melhor desempenho. Os resultados indicam que E. pellita e E. tereticornis apresentam potencial para a produção de papéis com alta resistência mecânica, como escrita, impressão e embalagem. A madeira das duas espécies tem potencial para uso na produção de papel e celulose.