Random laser with intrinsically uncomplicated fabrication processes, high spectral radiance, angle-free emission, and conformal onto freeform surfaces is in principle ideal for a variety of applications, ranging from lighting to identification systems. In this work, a white random laser (White-RL) with high-purity and high-stability is designed, fabricated, and demonstrated via the cost-effective materials (e.g., organic laser dyes) and simple methods (e.g., all-solution process and self-assembled structures). Notably, the wavelength, linewidth, and intensity of White-RL are nearly isotropic, nevertheless hard to be achieved in any conventional laser systems. Dynamically fine-tuning colour over a broad visible range is also feasible by on-chip integration of three free-standing monochromatic laser films with selective pumping scheme and appropriate colour balance. With these schematics, White-RL shows great potential and high application values in high-brightness illumination, full-field imaging, full-colour displays, visible-colour communications, and medical biosensing.
The experimental demonstrations of light-emitting diode (LED) fabrication with surface plasmon (SP) coupling with the radiating dipoles in its quantum wells are first reviewed. The SP coupling with a radiating dipole can create an alternative emission channel through SP radiation for enhancing the effective internal quantum efficiency when the intrinsic non-radiative recombination rate is high, reducing the external quantum efficiency droop effect at high current injection levels, and producing partially polarized LED output by inducing polarization-sensitive SP for coupling. Then, we report the theoretical and numerical study results of SP-dipole coupling based on a simple coupling model between a radiating dipole and the SP induced on a nearby Ag nanoparticle (NP). To include the dipole strength variation effect caused by the field distribution built in the coupling system (the feedback effect), the radiating dipole is represented by a saturable two-level system. The spectral and dipole-NP distance dependencies of dipole strength variation and total radiated power enhancement of the coupling system are demonstrated and interpreted. The results show that the dipole-SP coupling can enhance the total radiated power. The enhancement is particularly effective when the feedback effect is included and hence the dipole strength is increased.
The enhanced and partially polarized output of a green light-emitting diode (LED), in which its InGaN/GaN quantum well (QW) couples with surface plasmons (SPs) on a surface Ag grating structure, is demonstrated. Compared with a LED sample without (flat) Ag coating, the total output intensity of an LED of SP-QW coupling can be enhanced by when the grating period and groove depth are 500 and 30 nm, respectively. Also, a bottom-emission polarization ratio of 1.7 can be obtained under the condition of 15 nm in groove depth.
High-quality coalescence overgrowth of patterned-grown GaN nanocolumns on -plane sapphire substrate with metal organic chemical vapor deposition is demonstrated. Although domain structures of a tens of micron scale in the overgrown layer can be identified with cathodoluminescence measurement, from atomic force microscopy (AFM) measurement, the surface roughness of the overgrown layer in an area of is as small as 0.411 nm, which is only one-half that of the high-quality GaN thin-film template directly grown on sapphire substrate (the control sample). Based on the AFM and depth-dependent x-ray diffraction measurements near the surface of the overgrown layer, the dislocation density is reduced to the order of , which is one order of magnitude lower than that of the control sample and two to three orders of magnitude lower than those of ordinary GaN templates for fabricating light-emitting diodes. Also, the lateral domain size, reaching a level of , becomes three times larger than the control sample. Meanwhile, the ratio of photoluminescence intensity at room temperature over that at low temperature of the overgrown sample is at least six times higher than that of the control sample. Although the strain in nanocolumns is almost completely released, a stress of is rebuilt when the coalescence overgrowth is implemented.
Threading dislocation (TD) evolution during patterned GaN nanocolumn (NC) growth and coalescence overgrowth with metal-organic chemical vapor deposition is studied based on the comparisons of NC and coalescence overgrowth samples of different NC cross-section diameters and spacing sizes. From the measurement results of depth-dependent x-ray diffraction and cross-section transmission electron microscopy, it is found that the TD density in an NC depends on the patterned hole size for NC growth. Also, the TD formation at the beginning of coalescence overgrowth is related to the NC spacing size. Although the TD density at the bottom of the overgrown layer is weakly dependent on NC and spacing sizes, at its top surface, the TD density strongly relies on NC size. Among the overgrowth samples of different NC diameters and spacing sizes with a fixed NC diameter/spacing ratio, the one with the smallest size and spacing leads to the lowest TD density, the largest lateral domain size, and the highest photoluminescence efficiency. Also, the optical and crystal qualities at the surfaces of all the overgrowth samples are superior to those of a GaN template.