The control and utilization of coalbed methane (CBM) are crucial for ensuring the safety of coal mining operations and mitigating greenhouse gas emissions. Predrainage of CBM from boreholes plays a pivotal role in preventing CBM accidents, harnessing CBM energy resources, and reducing greenhouse gas emissions. To better understand the evolution of key parameters during the predrainage process of CBM boreholes, this study, based on fundamental assumptions of coupling models, integrates the theories of elasticity, seepage mechanics, and fluid mechanics. It establishes a comprehensive mathematical model that reveals the interrelationships among the stress field, deformation field, and seepage field within methane-containing coal systems. By comparing numerical solutions with analytical solutions and conducting physical similarity simulation experiments, the study demonstrates the correctness of the methane-containing coal fluid-solid coupling model. The model developed in this study represents an improvement over traditional methane-containing coal seepage theories and fluid-solid coupling model theories and can be widely applied in the prevention of coal and CBM outbursts as well as CBM extraction.
15 November 2024 in Engineering Applications of Artificial Intelligence
Pulverized coal explosions pose significant hazards during pneumatic conveying and handling in coal preparation and mining. To investigate flame propagation and pressure evolution under conditions representative of vertical conveying pipelines, explosion experiments were conducted using pulverized coal with defined particle sizes and dust concentrations. Flame propagation and pressure dynamics were synchronously captured via high-speed imaging and dynamic pressure measurements. Results showed that flame height exhibited a Logistic growth pattern, whereas flame propagation velocity followed an inverted parabolic trend, reaching a maximum value of 14.5 m s−1 at approximately 20 ms after ignition. Significant flame-front wrinkling, distortion, and oscillatory propagation were observed during explosion development, reflecting increasingly complex flame evolution within the confined vertical pipeline. Increasing dust concentration from 0.3 to 0.5 kg m−3 promoted flame acceleration and pressure development. For 45 μm particles, the maximum explosion pressure increased from 0.710 to 0.948 MPa. At a constant concentration, decreasing particle size enhanced both flame propagation and explosion severity. Under 0.5 kg m−3, the maximum pressure increased from 0.788 MPa for 200 μm particles to 0.948 MPa for 45 μm particles. The enhanced explosion intensity at higher concentrations and smaller particle sizes is attributed to accelerated heat and mass transfer together with more efficient combustion under confined conditions. These findings provide new insight into the coupled evolution of flame propagation and pressure development and contribute to explosion risk assessment in pulverized coal conveying systems.
15 October 2026 in Combustion Science and Technology
Coal spontaneous combustion in goafs is controlled by the balance among oxygen supply, heat release from low-temperature oxidation, and heat dissipation. Mining-induced fractures supply oxygen, whe...