A four-mode 2D/3D switchable display using a 1D/2D convertible liquid crystal (LC) lens array is proposed in this paper. The LC lens array is composed of two orthogonal LC lens arrays, with a λ/2 film in the middle to rotate the polarization by 90°. Based on the LC lens array, a four-mode 2D/3D switchable display is realized, which is switchable between the turn-off and turn-on states: when the operating voltage V₁ = 0, V₂ = 0, the display operates in mode I, which is 2D display; when the operating voltage V₁ = 0, V₂ = 0, the display operates in mode II, and the 3D display effect is in x direction; when the operating voltage V₁ = 0, V₂ = 0, the display operates in mode III, and the 3D display effect is in y direction; when the operating voltage V₁ = 0, V₂ = 0, the display operates in mode IV, the 3D display effect is in x-y plane. Experimental results indicate that the LC lens array has simple fabrication process, low operating voltage (∼5.4V), and short focal length. Moreover, based on the designed LC lens array, the 2D/3D switchable display shows no moiré pattern.

A liquid crystal (LC) lens array with high light control power and a large aperture using a composited alignment layer is proposed. In our design, the alignment layer is not only used for getting a uniform arrangement of LC molecule, but also for getting a lens-like refractive index distribution in the LC layer when a voltage is applied. Through simple technology processes, a tunable focal length LC lens array with a millimeter scale diameter can be achieved. Furthermore, the maximum phase difference of the proposed LC lens array can achieve 105.38π. So, the proposed LC lens array has a high light control power.

Determination of three-dimensional BP lattice constants using in situ measurements.

A blue-phase liquid crystal display (BPLCD) with single–penetration (S-P) electrodes is proposed to reduce the operating voltage. X-shape inclined-electric field is induced by the S-P electrodes with 2 ~ 3 μm height, which can lower the operating voltage by ~45%, and improve the transmittance compared with BPLCD with conventional in-plane electrodes. Moreover, the wide viewing angle and very small image distortion index can be obtained in this structure with a half-wave biaxial film. The proposed structure shows simple etching control and easy one-drop filling process of blue-phase liquid crystal compared with dual-convex-penetration electrodes.