Sustained mitigation and/or suppression of type-I edge localized modes (ELMs) has been achieved in EAST high-confinement plasmas, utilizing the resonant magnetic perturbation (RMP) fields produced by two rows of magnetic coils located just inside the vacuum vessel. Systematic toroidal modelling of the plasma response to these RMP fields with various coil configurations (with dominant toroidal mode number n = 1, 2, 3, 4) in EAST is, for the first time, carried out by using the MARS-F code (Liu et al 2000 Phys. Plasmas7 3681), with results reported here. In particular, the plasma response is computed with varying coil phasing (the toroidal phase difference of the coil currents) between the upper and lower rows of coils, from 0 to 360°. Four figures of merit, constructed based on the MARS-F computations, are used to determine the optimal coil phasing. The modelled results, taking into account the plasma response, agree well with the experimental observations in terms of the coil phasing for both the mitigated and the suppressed ELM cases in EAST experiments. This study provides a crucial confirmation of the role of the plasma edge peeling response in ELM control, complementing similar studies carried out for other tokamak devices.
An energy-principle-based dispersion relation is derived for the resistive wall mode, which incorporates both the drift kinetic resonance between the mode and energetic particles and the resistive layer physics. The equivalence between the energy-principle approach and the resistive layer matching approach is first demonstrated for the resistive plasma resistive wall mode. As a key new result, it is found that the resistive wall mode, coupled to the favorable average curvature stabilization inside the resistive layer (as well as the toroidal plasma flow), can be substantially more stable than that predicted by drift kinetic theory with fast ion stabilization, but with the ideal fluid assumption. Since the layer stabilization becomes stronger with decreasing plasma resistivity, this regime is favorable for reactor scale, high-temperature fusion devices.
The effects of an ideal/resistive conducting wall, the drift kinetic resonances, as well as the toroidal plasma flow, on the stability of the ideal external kink mode are numerically investigated for a reactor-relevant tokamak plasma with strongly negative triangularity (NTR) shaping. Comparison is made for a similar plasma equilibrium, but with positive triangularity (PTR). It is found that the ideal wall stabilization is less efficient for the kink stabilization in the NTR plasma due to a less 'external' eigenmode structure compared to the PTR plasma. The associated plasma displacement in the NTR plasma does not 'balloon' near the outboard mid-plane, as is normally the case for the pressure-driven kink-ballooning instability in PTR plasmas, but being more pronounced near the X-points. The toroidal flow plays a similar role for the kink stability for both NTR and PTR plasmas. The drift kinetic damping is less efficient for the ideal external kink mode in the NTR plasma, despite a somewhat larger fraction of the particle trapping near the plasma edge compared to the PTR equilibrium. However, the drift kinetic damping of the resistive wall mode (RWM) in the NTR plasma is generally as efficient as that of the PTR plasma, although the RWM window, in terms of the normalized pressure, is narrower for the NTR plasma.