Sustainable functionalization of renewable aromatics is a key step to supply our present needs for specialty chemicals and pursuing the transition to a circular, fossil-free economy. In the present work, three typically stable aromatic compounds, representative of products abundantly obtainable from biomass or recycling processes, were functionalized in one-pot oxidation reactions at room temperature, using H2O2 as a green oxidant and ethanol as a green solvent in the presence of a highly electron withdrawing iron porphyrin catalyst. The results show unusual initial epoxidation of the aromatic ring by the green catalytic system. The epoxides were isolated or evolved through rearrangement, ring opening by nucleophiles, and oxidation. Acridine was oxidized to mono- and di-oxides in the peripheral ring: 1:2-epoxy-1,2-dihydroacridine and anti-1:2,3:4-diepoxy-1,2,3,4-tetrahydroacridine, with TON of 285. o-Xylene was oxidized to 4-hydroxy-3,4-dimethylcyclohexa-2,5-dienone, an attractive building block for synthesis, and 3,4-dimethylphenol as an intermediate, with TON of 237. Quinoline was directly functionalized to 4-quinolone or 3-substituted-4-quinolones (3-ethoxy-4-quinolone or 3-hydroxy-4-quinolone) and corresponding hydroxy-tautomers, with TON of 61.
3 November 2023 in Biomass Conversion and Biorefinery
The production of specialty chemicals from lignocellulosic biomass can be increased by valuing underutilized biomass products using sustainable methods. The present work reports the activity of the biomass-derived iron(III) salicylate as a biocompatible and recyclable catalyst for the oxidative esterification of multi-functional aldehydes obtained as products from biomass processing. Esters were obtained in the presence of methyl, ethyl, i-propyl, and amyl alcohols as solvents, at room temperature and with H2O2 as a green oxidant. The catalytic system is selective for the esterification of 2- and 4-hydroxybenzaldehydes, namely salicylaldehyde, o-vanillin and vanillin; as well as of furfural and benzaldehyde, while esters of 9-formylanthracene and (E)-cinnamaldehyde were obtained concomitantly with products of hydroxylation of the polyaromatic ring to ethyl 10-hydroxyanthracene-9-carboxylate (η 46%), and of double bond oxidative cleavage of cinnamaldehyde to ethyl benzoate (η 27%), respectively. The ester products have applications as fragrances, flavors, photo- or bioactive compounds, or as intermediates for synthesis. The results were benchmarked against other Fe(III)–based catalysts, such as Fe(III) porphyrins ([Fe(TSPP)Cl] and [Fe(TMPyP)Cl]) and iron oxide nanoparticles. These studies confirmed the higher performance of Fe(III) salicylate. Graphical Abstract
6 August 2026 in ACS Sustainable Resource Management
Cost-effective, nature-based advanced materials offer highly promising platforms for sustainable removal of recalcitrant dyes in water treatment technologies. In the present work, wood fibers (WFs) act as renewable support, providing essential anchoring functionalities, structural robustness, and chromophore units on the lignocellulose surface. The covalent immobilization of iron salicylate—a bio-derivable catalyst characterized by strong Fe(III) coordination and high oxidative stability—was achieved under ecofriendly microwave heating conditions, yielding iron loadings of 0.5 at %. The WF-[Fe(Sal)] material showed remarkable trade-off between catalytic activity and stability throughout photocatalytic dye degradation, in the presence of visible light and H2O2. Cationic dyes, rhodamine B (RB) and methylene blue (MB), were removed through a synergistic mechanism of adsorption and catalytic degradation, while the removal of the anionic dye, indigo carmine, was primarily driven by oxidative degradation. Under optimal conditions, cationic dye removal efficiencies as high as 97% for RB and 89% for MB within 150 min were achieved in the presence of H2O2 vs 82% for RB and MB in the absence of H2O2. As for the anionic dye indigo carmine, 93% removal was obtained in the presence of H2O2 vs 8% in the absence of H2O2. Furthermore, the catalytic material maintained its structural and chemical integrity over five cycles, with no detectable iron leaching.
Bio-derived functional materials are key platforms for long-term sustainable environmental remediation. Pine wood fibres (WF) is an abundant and renewable material with functional properties suited to specialized applications, including a high density of hydroxyl groups at its surface and mechanical toughness imparted by the lignin fraction. In the present work, monometallic and bimetallic nanoparticles (NPs) of first series transition metals, Fe, Co, Cu and Fe/Cu were immobilized onto original WF and WF treated with NaOH (WF_N). The prepared WF-supported NPs were characterized by SEM/EDS, XPS, XRD and FTIR-ATR and evaluated in the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol in aqueous solution, at room temperature, by NaBH4. Copper-based materials exhibited superior catalytic efficiency, with the NaOH pre-treatment yielding shorter induction times and enhanced stability. For material WF_NCu, 97 % of 4-NP reduction was achieved in 3 minutes with a rate constant of k1 = 2.209 min-1. This material was used for five successive cycles with no decrease in 4-NP reduction efficiency, being easily recovered from reaction media.
Bio-derived functional materials are key platforms for long-term sustainable environmental remediation. Pine wood fibres (WF) are an abundant and renewable material with functional properties suited to specialized applications, including high density of hydroxyl groups at its surface and mechanical toughness imparted by the lignin fraction. In the present work, monometallic and bimetallic nanoparticles (MNP) of first-series transition metals, Fe, Co, Cu and Fe/Cu were immobilized onto original WF and WF treated with NaOH (WF_N). The prepared WF-supported MNP were characterized by SEM/EDS, XPS, XRD and FTIR-ATR, and evaluated in the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in aqueous solution, at room temperature, by NaBH4. Copper-based materials exhibited superior catalytic efficiency, with the NaOH pre-treatment of the fibres yielding shorter induction times and enhanced stability. For the WF_NCu material, 97% of 4-NP reduction was achieved in 3 min with a rate constant of k1 = 2.147 min−1. This material was used for five successive cycles with no decrease in 4-NP reduction efficiency, being easily recovered from the reaction media.