The need to cut carbon emissions and the worry about global warming will be two of the major issues of the twenty-first century. Globally, academics are researching renewable energy sources, with the majority of their efforts focused on the converter side, which is critical to contemporary society. For energy conversion, fuel cells provide an alternative to internal combustion engines. Despite the fact that typical DC-to-DC converters experience high stress and minimal voltage rise, the bulk of research focuses on voltage lift. Researchers from all around the globe use DC-DC converters to control the voltage of fuel cells. If the targets are fulfilled, more switches will be placed, resulting in higher losses. The boost-cuk converter in this research has a high voltage gain and low switching strain. Initially, this contributed to the development of self-control. Switching losses are reduced when just one switch is used. A DC-DC converter is employed in this research to transform the electricity provided by fuel cells. The alternating supply is then sent to the brushless direct current (BLDC) motor by the PWM inverter. The work starts by building MATLAB simulation blocks. Finally, Simulink is used to display the simulated output waveforms of the intended converter.
1 December 2023 in Indonesian Journal of Electrical Engineering and Computer Science
A modern and expanding civilization now takes for granted that future environments will be clean, efficient, and carbon neutral. Energy-efficient electrical loads, such as v ehicle charging now often u sed in schools, companies, and gated communities. Recent articles have focused more on Swarm smart grid technology as a way to transmit power from rooftop solar installations. A major issue with the system is the necessity for inverters and other conversio n equipment. The mechanism consumes part of the power generated by this process. It is possible to utilize the DC supply to power the v ehicle chargers in smart houses, although some tweaks may be necessary. The charging Vehicle is a common task that can sh are by different converter by swarm network. This study demonstrates the feasibility of using a swam nano grid t o interconnect buildings inside a campus or other large business or residential complex, as well as within a gated community. The electricity gr id is monitored by the swam nano grid system, which eliminates the need for costly equipment. The DC - DC converter was being controlled directly by the simple logic controller. M ATLAB Simulink simulates the controlled converter under load and shows the performance of a bidirectional DC-DC converter using waveforms.
8 August 2026 in Analog Integrated Circuits and Signal Processing
This manuscript presents a logical-based method with a constrained programming approach for making use of the principle. The proposed optimal approach is the improved chameleon swarm algorithm (ICSA). The navigating and hunting behavior of CSA is improved with the crossover and mutation processes, and it is defined as the ICSA approach. The proposed hybrid approach is the number one power consumption, greenhouse gas, and total annual cost (TAC), in addition to including conditions largely based entirely on the monitoring approach, which is a mixture of those standards. These three power-corresponding parameters have been exploited to examine the overall performance of every method corresponding to the absorbed power providers employing the construction call for requests. The calculation of the established effectiveness for four varieties of residents’ homes suggests the not-infrequent place hybrid method. This increases the exploitation of the cogeneration system as well as the proposed method because the most appropriate techniques include measures capable of obtaining excellent conciliation answers done with TAC at 55%, primary energy consumption (PEC) at 14%, and greenhouse generation (GHG) at 9% discounts correspondingly. However, the proposed method obtains optimum discounts in TAC and optimum overall performance for power matching by utilizing identical boundaries for GHG and PEC in assessment to the always infrequent place hybrid technique. The prey-in cost for energy era with nearly 60 in TAC is perceived as the maximum leading monetary constraint for sensibility evaluation when micro-cogeneration units use over 3% gain and are the most disrupted outcome for randomly evaluated.
This paper proposes a new DC-DC converter at the front-end of the powertrain of FCVs which offers a high step-up voltage gain with low voltage stress. Battery systems of FCEVs supply a high voltage alternating current (AC) output while fuel cell systems in FCVs output low-voltage DC. In adopting electric drivetrains there is need to have efficient voltage conversion for the high voltage needed.. Conventional topology converters can often fail to provide the required voltage boost while also experiencing heavy efficiency degradation together with voltage stress affecting the elements of the converter’s circuit, which can reduce its reliability and shorten its lifespan. The converters’ TLO operating principles and performance indicators are comprehensively explored and analytically quantified using mathematical modeling. The findings of the study’s simulation support the theoretical propositions and highlight that the converter can deliver greater than tenfold string voltage gain while reducing the voltage stress on semiconductor switching devices and diodes. Since the DC-DC converter maintain a constant output voltage, is cheap, easy to construct, and has an efficiency of over 95% it is suitable for many FCV applications. It provides useful procedure for enhancing the efficiency and lifespan of FCVs through achieving high voltage and low stress conversion.