Octopus maya is a fast-growing species from the Yucatán Peninsula with high economic relevance, accounting for a major share of regional fishery production. However, a significant fraction of the organism, rich in type I collagen, is discarded as by-products, representing a promising and underutilized source for sustainable biomaterials. This study evaluated, through a 3² factorial design, the effect of two factors on the rheological and dynamic mechanical properties of film-forming solutions (FFS). The first factor was the type of food-grade polysaccharide: chitosan (Ch), hydroxypropyl methylcellulose (HPMC), or starch (S). The second factor was the proportion of each polysaccharide blended with ultrasound-extracted Octopus maya insoluble collagen (CIPM), using polysaccharide ratios of 30:70, 50:50, and 70:30 (w/w). This approach aims to valorize octopus by-products through the recovery and functional utilization of collagen. Rheological properties were determined by rotational and oscillatory rheometry at 25 °C, with flow curves fitted to the Carreau-Yasuda model. All formulations exhibited pseudoplastic behavior (n < 1), with viscosity decreasing as shear rate increased. Pure CIPM showed high viscosity (190.36 Pa·s at 1 s⁻¹), which decreased (0.3–10.44 Pa·s) in HPMC and chitosan systems, suggesting their potential suitability for applications requiring fluidity, such as spray coatings or film-forming solutions, based on their rheological properties. In contrast, starch-based systems exhibited higher viscosities (33.54–197.53 Pa·s) and a more structured viscoelastic profile (G′ > G″), suggesting potential suitability for thick coatings or gels requiring structural stability, although these applications were not experimentally validated. These results demonstrate that CIPM-polysaccharide systems enable tunable rheological properties, supporting the use of Octopus maya collagen as a sustainable functional material for advanced food and biomaterial design.

Octopus maya is a fast-growing species from the Yucatán Peninsula with high economic relevance, accounting for a major share of regional fishery production. However, a sig-nificant fraction of the organism, rich in type I collagen, is discarded as by-products, representing a promising and underutilized source for sustainable biomaterials. This study evaluated, through a 3² factorial design, the effect of two factors: (1) the type of food-grade polysaccharide, chitosan (Ch), hydroxypropyl methylcellulose (H), or starch (S), and (2) its proportion in blendings with Octopus maya insoluble collagen (CIPM), obtained by ultrasound-assisted extraction, using polysaccharide:collagen ratios of 30:70, 50:50, and 70:30 (w/w), and using rheological and dynamic mechanical properties of film-forming solutions (FFS) as response variables. This approach aims to valorize oc-topus by-products through the recovery and functional utilization of collagen. Rheo-logical properties were determined by rotational and oscillatory rheometry at 25 °C, with flow curves fitted to the Carreau-Yasuda model. All formulations exhibited pseu-doplastic behavior (n < 1), with viscosity decreasing as shear rate increased. Pure CIPM showed high viscosity (190.36 Pa·s at 1 s⁻¹), which decreased (0.3-10.44 Pa·s) in HPMC and chitosan systems, favoring applications requiring fluidity, such as spray coatings or film-forming solutions. In contrast, starch-based systems exhibited higher viscosities (33.54-197.53 Pa·s) and a more structured viscoelastic profile (G′ > G″), forming networks suitable for thick coatings or gels requiring structural stability. These results demonstrate that CIPM-polysaccharide systems enable tunable rheological properties, supporting the use of Octopus maya collagen as a sustainable functional material for advanced food and biomaterial design.