The incorporation of cognitive radio (CR) and energy harvesting (EH) capabilities in wireless sensor networks enables spectrum and energy-efficient heterogeneous CR sensor networks (HCRSNs). The new networking paradigm of HCRSNs consists of EH-enabled spectrum sensors and battery-powered data sensors. Spectrum sensors can cooperatively scan the licensed spectrum for available channels, whereas data sensors monitor an area of interest and transmit sensed data to the sink over those channels. In this paper, we propose a resource-allocation solution for the HCRSN to achieve the sustainability of spectrum sensors and conserve the energy of data sensors. The proposed solution is achieved by two algorithms that operate in tandem: a spectrum sensor scheduling (SSS) algorithm and a data sensor resource allocation (DSRA) algorithm. The SSS algorithm allocates channels to spectrum sensors such that the average detected available time for the channels is maximized, while the EH dynamics are considered and primary user (PU) transmissions are protected. The DSRA algorithm allocates the transmission time, power, and channels such that the energy consumption of the data sensors is minimized. Extensive simulation results demonstrate that the energy consumption of the data sensors can be significantly reduced, while maintaining the sustainability of the spectrum sensors.
20 September 2016 in IEEE Journal on Selected Areas in Communications
In this paper, we study resource management and allocation for energy harvesting cognitive radio sensor networks (EHCRSNs). In these networks, energy harvesting supplies the network with a continual source of energy to facilitate the self-sustainability of the power-limited sensors. Furthermore, cognitive radio enables access to the underutilized licensed spectrum to mitigate the spectrum-scarcity problem in the unlicensed band. We develop an aggregate network utility optimization framework for the design of an online energy management, spectrum management, and resource allocation algorithm based on Lyapunov optimization. The framework captures three stochastic processes: energy harvesting dynamics, inaccuracy of channel occupancy information, and channel fading. However, a priori knowledge of any of these processes statistics is not required. Based on the framework, we propose an online algorithm to achieve two major goals: first, balancing sensors' energy consumption and energy harvesting while stabilizing their data and energy queues; second, optimizing the utilization of the licensed spectrum while maintaining a tolerable collision rate between the licensed subscriber and unlicensed sensors. The performance analysis shows that the proposed algorithm achieves a close-to-optimal aggregate network utility while guaranteeing bounded data and energy queue occupancy. The extensive simulations are conducted to verify the effectiveness of the proposed algorithm and the impact of various network parameters on its performance.
25 February 2019 in IEEE Transactions on Mobile Computing
Utilizing the intelligence at the network edge, edge computing paradigm emerges to provide time-sensitive computing services for Internet of Things. In this paper, we investigate sustainable computation offloading in an edge-computing system that consists of energy harvesting-enabled mobile devices (MDs) and a dispatcher. The dispatcher collects computation tasks generated by IoT devices with limited computation power, and offloads them to resourceful MDs in exchange for rewards. We propose an online Rewards-optimal Auction (RoA) to optimize the long-term sum-of-rewards for processing offloaded tasks, meanwhile adapting to the highly dynamic energy harvesting (EH) process and computation task arrivals. RoA is designed based on Lyapunov optimization and Vickrey-Clarke-Groves auction, the operation of which does not require a prior knowledge of the energy harvesting, task arrivals, or wireless channel statistics. Our analytical results confirm the optimality of tasks assignment. Furthermore, simulation results validate the analytical analysis, and verify the efficacy of the proposed RoA.
4 March 2010 in IEEE Transactions on Vehicular Technology
This paper presents a novel scheme for the allocation of subcarriers, rates, and power in orthogonal frequency-division multiple-access (OFDMA) networks. The scheme addresses practical implementation issues of resource allocation in OFDMA networks: the inaccuracy of channel-state information (CSI) available to the resource allocation unit (RAU) and the diversity of subscribers' quality-of-service (QoS) requirements. In addition to embedding the effect of CSI imperfection in the evaluation of the subscribers' expected rate, the resource-allocation problem is posed as a network utility maximization (NUM) one that is solved via decomposing it into a hierarchy of subproblems. These subproblems coordinate their allocations to achieve a final allocation that satisfies aggregate rate constraints imposed by the call-admission control (CAC) unit and OFDMA-related constraints. A complexity analysis shows that the proposed scheme is computationally efficient. In addition, performance evaluation findings support our theoretical claims: A substantial data rate gain can be achieved by considering the CSI imperfection, and multiservice classes can be supported with QoS guarantees.
In this paper, we focus on the resources allocation for the OFDMA based two-hop relay network which consists of a single base station, dedicated fixed relay stations and subscriber stations. Subscriber stations are allocated the subcarriers and relay stations that are required to satisfy their minimum rate requirements in either non-cooperative mode (i.e., direct communication with the base station) or in cooperative mode with one of the available relay stations. The cooperation is limited to one relay station to reduce the complexity incurred by the need for synchronization with multiple relays and with the base station at the PHY layer. The subcarriers and relay stations allocation problem is formulated as a Binary Integer Programming (BIP) problem with QoS constraints (minimum rate) and a practical synchronization constraint (cooperation with a single relay). Since the formulated problem is NP-complete, a simple sub-optimal algorithm is proposed to manage the multi-service network resources. Simulations and complexity analysis show that the presented algorithm achieves a network near optimal resources allocation with low computational complexity.
8 October 2012 in IEEE Transactions on Aerospace and Electronic Systems
An acoustic vector-sensor (a.k.a. vector-hydrophone) is composed of three acoustic velocity-sensors, plus a collocated pressure-sensor, all collocated in space. The velocity-sensors are identical, but orthogonally oriented, each measuring a different Cartesian component of the three-dimensional particle-velocity field. This acoustic vector-sensor offers an azimuth-elevation response that is invariant with respect to the source's center frequency or bandwidth. This acoustic vector-sensor is adopted here for recursive least-squares (RLS) adaptation, to track a single mobile source, in the absence of any multipath fading and any directional interference. A formula is derived to preset the RLS forgetting factor, based on the prior knowledge of only the incident signal power, the incident source's spatial random walk variance, and the additive noise power. The work presented here further advances a multiple-forgetting-factor (MFF) version of the RLS adaptive tracking algorithm, that requires no prior knowledge of these aforementioned source statistics or noise statistics. Monte Carlo simulations demonstrate the tracking performance and computational load of the proposed algorithms.