Compact photonic systems that offer high frequency stability and low noise are of increasing importance to applications in precision metrology, quantum computing, communication and advanced sensing technologies. However, on-chip resonators comprising dielectrics cannot match the frequency stability and noise characteristics of Fabry–Pérot cavities, whose electromagnetic modes live almost entirely in vacuum. Here we present a novel strategy to interface microfabricated Fabry–Pérot cavities with photonic integrated circuits to realize compact, high-performance integrated systems. Using this new integration approach, we demonstrate the self-injection locking of an on-chip laser to a millimetre-scale vacuum-gap Fabry–Pérot cavity using a circuit interface that transforms the reflected cavity response to enable efficient feedback to the laser. This system achieves a phase noise of –97 dBc Hz–1 at 10-kHz offset frequency, a fractional frequency stability of 5 × 10−13 at 10 ms, a 150-Hz 1/π integral linewidth and a 35-mHz fundamental linewidth. We also present a complementary integration strategy that utilizes a vertical-emission grating coupler and a back-reflection cancellation circuit to realize a fully co-integrated module that effectively redirects the reflected signals and isolates back-reflections with a 10-dB suppression ratio, serving as a key for on-chip Pound–Drever–Hall locking. Together, these results highlight how vacuum-gap Fabry–Pérot reference cavities can be harnessed for ultrastable, low-noise photonic systems.
We demonstrate a high finesse, microfabricated mirror-based, air-gap cavity with volume less than 1 ml, constructed in an array, that can support low-noise microwave generation through optical frequency division. We use the air-gap cavity in conjunction with a 10 nm bandwidth mode-locked laser to generate low phase noise 10 GHz microwaves, exhibiting a phase noise of −95 and −142 dBc/Hz at 100 Hz and 10 kHz offset frequencies, respectively. This is accomplished using the 2-point lock optical frequency division method, where we exploit 40 dB common-mode rejection of two lasers separated by 1.29 THz and locked to the same air-gap cavity. If used with an octave spanning comb, the air-gap cavity is capable of supporting 10 GHz phase noise below −160 dBc/Hz at 10 kHz offset, a level significantly lower than electronic synthesizers. These results show how extremely small optical reference cavities, operated without the benefit of vacuum enclosures or thermal insulation, can, nonetheless, support state-of-the-art microwave phase noise in compact and portable systems.
New strategies for converting signals between optical and microwave domains could play a pivotal role in advancing both classical and quantum technologies. Traditional approaches to optical-to-microwave transduction typically perturb or destroy the information encoded on intensity of the light field, eliminating the possibility for further processing or distribution of these signals. In this paper, we introduce an optical-to-microwave conversion method that allows for both detection and spectral analysis of microwave photonic signals without degradation of their information content. This functionality is demonstrated using an optomechanical waveguide integrated with a piezoelectric transducer. Efficient electromechanical and optomechanical coupling within this system permits bidirectional optical-to-microwave conversion with a quantum efficiency of up to −54.16 dB. Leveraging the preservation of the optical field envelope in intramodal Brillouin scattering, we demonstrate a multi-channel microwave photonic filter by transmitting an optical signal through a series of electro-optomechanical waveguide segments, each with distinct resonance frequencies. Such electro-optomechanical systems could offer flexible strategies for remote sensing, channelization, and spectrum analysis in microwave photonics.
The unique benefits of Fabry–Pérot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and time-keeping systems, it will be necessary to develop strategies to integrate compact Fabry–Pérot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry–Pérot resonators with a silicon photonic circuit. This circuit interface produces a spatial separation of the incident and reflected waves, as required for on-chip Pound–Drever–Hall frequency locking, while also suppressing unwanted back reflections from the Fabry–Pérot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.
Low-noise and accessible millimeter-wave sources are critical for emergent telecommunications, radar, and sensing applications. Current limitations to realizing low-noise, deployable millimeter-wave systems include size, weight, and power requirements, along with complex operating principles. In this paper, we provide a compact photonic implementation for generating low phase noise millimeter-waves, which significantly simplifies the architecture and reduces the volume compared to alternative approaches. Two commercial diode lasers are self-injection-locked to a micro-Fabry–Perot cavity, and their heterodyne provides low phase noise millimeter-waves reaching −148 dBc/Hz at 1 MHz offset on a 111.45 GHz carrier. Phase noise characterization at such levels and frequencies poses unique challenges, and we further highlight the capabilities of optically based measurement techniques. Our approach to millimeter-wave generation can leverage advances in photonic integration for further miniaturization and packaging, thus providing a unique source of accessible, compact, and low-noise millimeter-waves.