Efficient irrigation management requires complementary information on atmospheric demand, soil conditions, and crop water stress. This study presents a low-power Internet of Things (IoT)-based irrigation system that integrates these components within a unified monitoring and control framework. The system combines LoRa communication, ESP32-based sensor nodes, soil and meteorological sensing, FAO-56 reference evapotranspiration (), and canopy-temperature-based Crop Water Stress Index (CWSI). Irrigation decisions rely on the complementary use of , in situ soil measurements, and CWSI rather than on a single indicator. A hybrid time-, event-, and query-driven acquisition strategy was implemented to adapt node activity and limit communication overhead. The system was deployed under outdoor conditions in Oujda, Morocco, demonstrating integrated sensing, wireless data transmission, crop-stress monitoring, and automated irrigation control. Energy characterization further showed distinct consumption profiles across sensing, communication, actuation, and low-power operating states, supporting the use of duty cycling to limit active node operation. The results demonstrate the feasibility of integrating environmental, soil, and crop-level information within a low-power IoT framework for adaptive irrigation management.
In this study, a low-cost smart fog irrigation system is proposed to improve microclimate management during the propagation of unrooted Ficus carica L. cuttings under greenhouse conditions. The proposed system is based on Internet of Things (IoT) technology and LoRaWAN communication for real-time monitoring and automatic fogging control in a propagation greenhouse. The architecture integrates rain-drop and soil-moisture sensors, low-power embedded nodes, a LoRaWAN gateway, a monitoring server, and 12 V DC solenoid valves for fogging actuation. The collected data are transmitted wirelessly, stored, visualized through a web interface, and used to activate fogging according to detected drying conditions. The experimental results showed that soil humidity remained relatively stable at approximately 31%, while the alternation between wet and dry phases confirmed the responsiveness of the closed-loop fogging logic. At the end of the propagation period, 530 rooted cuttings were obtained from approximately 700 tested cuttings, corresponding to a rooting success rate of 75.71%. These results indicate that the proposed sensor-based fogging strategy provided favorable microclimatic conditions for fig cutting propagation. The system is scalable and promising for adaptive microclimate and water management; however, direct water-consumption measurements and controlled comparisons with timer-based fogging systems should be included in future work.