Hui Wang

Dr. Hui Wang


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2013 in BMC Genomics
Verified
Journal Article
Open access
PDF file
MZMin Zhang
Min Zhang
YZYuwen Zhou
Yuwen Zhou
HWHui Wang
Hui Wang
HJHuw Dylan Jones
Huw Dylan Jones
QGQiang Gao
Qiang Gao
LXLanqin Xia
Lanqin Xia
Background: The grain aphid (Sitobion avenae F.) is a major agricultural pest which causes significant yield losses of wheat in China, Europe and North America annually. Transcriptome profiling of the grain aphid alimentary canal after feeding on wheat plants could provide comprehensive gene expression information involved in feeding, ingestion and digestion. Furthermore, selection of aphid-specific RNAi target genes would be essential for utilizing a plant-mediated RNAi strategy to control aphids via a non-toxic mode of action. However, due to the tiny size of the alimentary canal and lack of genomic information on grain aphid as a whole, selection of the RNAi targets is a challenging task that as far as we are aware, has never been documented previously. Results: In this study, we performed de novo transcriptome assembly and gene expression analyses of the alimentary canals of grain aphids before and after feeding on wheat plants using Illumina RNA sequencing. The transcriptome profiling generated 30,427 unigenes with an average length of 664 bp. Furthermore, comparison of the transcriptomes of alimentary canals of pre- and post feeding grain aphids indicated that 5490 unigenes were differentially expressed, among which, diverse genes and/or pathways were identified and annotated. Based on the RPKM values of these unigenes, 16 of them that were significantly up or down-regulated upon feeding were selected for dsRNA artificial feeding assay. Of these, 5 unigenes led to higher mortality and developmental stunting in an artificial feeding assay due to the down-regulation of the target gene expression. Finally, by adding fluorescently labelled dsRNA into the artificial diet, the spread of fluorescence signal in the whole body tissues of grain aphid was observed. Conclusions: Comparison of the transcriptome profiles of the alimentary canals of pre- and post-feeding grain aphids on wheat plants provided comprehensive gene expression information that could facilitate our understanding of the molecular mechanisms underlying feeding, ingestion and digestion. Furthermore, five novel and effective potential RNAi target genes were identified in grain aphid for the first time. This finding would provide a fundamental basis for aphid control in wheat through plant mediated RNAi strategy.

4 October 2016 in Journal of Orthopaedic Surgery and Research
Verified
Journal Article
Open access
PDF file
XWXuyi Wang
Xuyi Wang
JPJianping Peng
Jianping Peng
DLDe Li
De Li
LZLinlin Zhang
Linlin Zhang
HWHui Wang
Hui Wang
XCXiaodong Chen
Xiaodong Chen
The success of Bernese periacetabular osteotomy depends significantly on how extent the acetabular fragment can be corrected to its optimal position. This study was undertaken to investigate whether correcting the acetabular fragment into the so-called radiological “normal” range is the best choice for all developmental dysplasia of the hip with different severities of dysplasia from the biomechanical view? If not, is there any correlation between the biomechanically optimal position of the acetabular fragment and the severity of dysplasia? Four finite element models with different severities of dysplasia were developed. The virtual periacetabular osteotomy was performed with the acetabular fragment rotated anterolaterally to incremental center-edge angles; then, the contact area and pressure and von Mises stress in the cartilage were calculated at different correction angles. The optimal position of the acetabular fragment for patients 1, 2, and 3 was when the acetabular fragment rotated 17° laterally (with the lateral center-edge angle of 36° and anterior center-edge angle of 58°; both were slightly larger than the “normal” range), 25° laterally following further 5° anterior rotation (with the lateral center-edge angle of 31° and anterior center-edge angle of 51°; both were within the “normal” range), and 30° laterally following further 10° anterior rotation (with the lateral center-edge angle of 25° and anterior center-edge angle of 40°; both were less than the “normal” range), respectively. The optimal corrective position of the acetabular fragment is severity dependent rather than within the radiological “normal” range for developmental dysplasia of the hip. We prudently proposed that the optimal correction center-edge angle of mild, moderate, and severe developmental dysplasia of the hip is slightly larger than the “normal” range, within the “normal” range, and less than the lower limit of the “normal” range, respectively.

10 September 2023 in Crystals
Verified
Journal Article
Open access
PDF file
XYXu Xiao yu
Xu Xiao yu
XFXiaoying Feng
Xiaoying Feng
LZLiyang Zhou
Liyang Zhou
HWHui Wang
Hui Wang
BYBin Yan
Bin Yan
Feng GaoFeng Gao
Feng Gao
Piezoelectric constant and Curie temperature are two important parameters of piezoelectric materials, but currently most piezoelectric materials have the problem of obtaining both high piezoelectric coefficient and Curie temperature. In this work, quaternary piezoelectric ceramics of 0.28Pb(In1/2Nb1/2)O3-0.32Pb(Zn1/3Nb2/3)O3–(0.4-x)PbTiO3-xPbZrO3 (x = 0~0.25) were designed and prepared by a solid-phase method, and the phase structure, dielectric, piezoelectric and ferroelectric properties of 0.28PIN-0.32PZN-(0.4-x)PT-xPZ piezoelectric ceramics were investigated by regulating the Zr/Ti ratio. The results show that the selected compositions are located in the MPB region, and the ceramic samples of each component display high density, the piezoelectric constant (d33) and the electromechanical coupling coefficient (kp) increase and then decrease with the increase of x. The optimum piezoelectric properties are found in compositions at x = 0.1, which showed a high piezoelectric coefficient d33 of 450 pC/N and high Curie temperature Tc of 272 °C. It is promising for use in high-temperature piezoelectric transducers.

19 April 2025 in Processes
Verified
Journal Article
Open access
PDF file
XCXiaoyu Cheng
Xiaoyu Cheng
CCCheng Cheng
Cheng Cheng
HWHui Wang
Hui Wang
LXLu Xiao
Lu Xiao
XMXingying Ma
Xingying Ma
This study investigates a dynamic regulation strategy for intelligent gas drainage negative pressure using a comprehensive approach involving numerical simulations, intelligent algorithms, and field experiments. In the numerical simulation component, a permeability evolution model was developed to characterize the area in front of the mining face. Simulations were performed under three negative pressure settings (13 kPa, 18 kPa, and 25 kPa) to investigate the relationships among drainage negative pressure, gas concentration, and flow rate. For the intelligent algorithm, a Long Short-Term Memory (LSTM) prediction model was developed to forecast drainage negative pressure. Based on the predictions, a dynamic regulation strategy for intelligent gas drainage negative pressure was formulated. For field validation, a 120-day in situ experiment was carried out. Intelligent control valves and monitoring instruments were deployed across various sections of the coal seam ahead of the mining face, validating the proposed regulation strategy. The results indicate that permeability is highest in the pressure-relief zone ahead of the mining face and lowest in the stress concentration zone. In the original stress zone, which is unaffected by mining disturbances, the permeability remains unchanged. Drainage negative pressure is positively correlated with gas flow rate, but negatively correlated with gas concentration. In the stress concentration zone, when drainage negative pressure reaches 25 kPa, permeability ceases to be the dominant factor influencing gas flow. At this stage, the pressure gradient between the gas in coal fractures and the drainage system becomes the primary driving force for gas flow. The intelligent dynamic regulation strategy for gas drainage, underpinned by the LSTM prediction model, demonstrated strong performance in field applications. Following intelligent regulation, gas concentrations in various regions showed significant improvement. The findings of this study actively contribute to the advancement of intelligent gas drainage technology.

29 June 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
GWGuorui Wang
Guorui Wang
HWHui Wang
Hui Wang
ZHZheng He
Zheng He
SGShichang Gao
Shichang Gao
GZGang Zhang
Gang Zhang
JYJinkai Yan
Jinkai Yan
Suyukou Gully, located on the eastern slope of the Helan Mountains in northwest China, is a typical debris-flow-prone catchment characterized by a steep terrain, fractured bedrock, and abundant loose colluvial material. The area is subject to intense short-duration convective rainfall events, which often trigger destructive debris flows that threaten the Suyukou Scenic Area. To investigate the dynamics and risks associated with such events, this study employed the FLO-2D two-dimensional numerical model to simulate debris flow propagation, deposition, and hazard distribution under four rainfall return periods (10-, 20-, 50-, and 100-year scenarios). The modeling framework integrated high-resolution digital elevation data (original 5 m DEM resampled to 20 m grid), land-use classification, rainfall design intensities derived from regional storm atlases, and detailed field-based sediment characterization. Rheological and hydraulic parameters, including Manning’s roughness coefficient, yield stress, dynamic viscosity, and volume concentration, were calibrated using post-event geomorphic surveys and empirical formulations. The model was validated against field-observed deposition limits and flow depths, achieving a spatial accuracy within 350 m. Results show that the debris flow mobility and hazard intensity increased significantly with rainfall magnitude. Under the 100-year scenario, the peak discharge reached 1195.88 m3/s, with a maximum flow depth of 20.15 m and velocities exceeding 8.85 m·s−1, while the runout distance surpassed 5.1 km. Hazard zoning based on the depth–velocity (H × V) product indicated that over 76% of the affected area falls within the high-hazard zone. A vulnerability assessment incorporated exposure factors such as tourism infrastructure and population density, and a matrix-based risk classification revealed that 2.4% of the area is classified as high-risk, while 74.3% lies within the moderate-risk category. This study also proposed mitigation strategies, including structural measures (e.g., check dams and channel straightening) and non-structural approaches (e.g., early warning systems and land-use regulation). Overall, the research demonstrates the effectiveness of physically based modeling combined with field observations and a GIS analysis in understanding debris flow hazards and supports informed risk management and disaster preparedness in mountainous tourist regions.

30 June 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
YGYongfeng Gong
Yongfeng Gong
SGShichang Gao
Shichang Gao
GZGang Zhang
Gang Zhang
GWGuorui Wang
Guorui Wang
ZHZheng He
Zheng He
YZYaoyao Zhang
Yaoyao Zhang
Geological hazards pose significant threats to ecological stability, human lives, and infrastructure, necessitating precise and robust risk assessment methodologies. This study evaluates geological hazard risks in Dawukou District, Shizuishan City, Ningxia Hui Autonomous Region, using the information value (IV) model. The study systematically identifies susceptibility, hazard, and vulnerability factors influencing geological disaster risks by integrating diverse datasets encompassing geological conditions, meteorological parameters, and anthropogenic activities. The key findings reveal that hilly landforms, slope gradients, and vegetation indices are the dominant contributors to hazard development. Additional factors, including lithology, fault proximity, and precipitation, were also found to play critical roles. The results categorize the district into four risk zones: high-risk areas (1.55% of the total area), moderate-risk areas (10.16%), Low-risk areas (23.32%), and very-low-risk areas (64.97%). These zones exhibit a strong spatial correlation with geomorphic features, tectonic activity, and human engineering interventions, such as mining and infrastructure development. High-risk zones are concentrated near mining regions and fault lines with steep slopes, while low-risk zones are predominantly in flat plains and urban centers. The reliability of the risk assessment was validated through cross-referenced geological hazard occurrence data and Receiver Operating Characteristic (ROC) curve analysis, achieving a high predictive accuracy (AUC = 0.88). The study provides actionable insights for disaster prevention, mitigation strategies, and urban planning, offering a scientific basis for resource allocation and sustainable development. The methodology and findings serve as a replicable framework for geological hazard risk assessments in similar regions facing diverse environmental and anthropogenic challenges.