— We present results of an 11B and 29Si nuclear magnetic resonance (NMR) spectroscopy study of the local anion structure of a series of borosilicate glasses in the Rb2O–B2O3–SiO2system with...
To study immobilization properties of oxide borosilicate systems, we have assessed the effect of molybdenum on the structure, phase composition, and thermal properties of glass-ceramic materials prepared via rapid cooling of high-alkali melts in the Li2O–(Na2O–K2O)–B2O3–SiO2 system. The results demonstrate that the molybdenum-free materials consist of homogeneous borosilicate glass, which partially crystallizes during heat treatment (annealing). The only exception is a glass sample of the K2O–B2O3–SiO2 system, which has high thermal stability. The addition of molybdenum oxide to these materials in the high-temperature synthesis step initiates crystallization processes, which are most pronounced after heat treatment (annealing). In the materials containing one alkali metal cation in their composition, all of the added molybdenum oxide enters into the composition of the alkali metal molybdates embedded in a homogeneous amorphous highly polymerized borosilicate matrix. In the samples containing cations of two alkali metals in their composition, crystallization processes lead to the formation of a highly inhomogeneous crystalline material. The good homogeneity of the glass-ceramic materials prepared via rapid cooling of high-alkali molybdenum-containing melts of the Li2O–(Na2O–K2O)–B2O3–SiO2 system with one type of alkali metal cation in their composition allows them to be recommended for temporary immobilization of molybdenum oxide-rich radioactive waste.
Using electron microscopy and electron probe X-ray fluorescence microanalysis, we have studied chemical and structural changes in the zone of high-temperature contact between 08Cr18Ni10Ti steel and model alkali alkaline earth borosilicate waste form materials for radioactive waste immobilization. The results demonstrate that high-temperature contact with molten waste form materials considerably speeds up corrosion of the metal and that corrosion on the steel surface leads to segregation of corrosion products and the formation of iron chromium spinel and metallic nickel grains under the glass layer. The oxidation product layer has the form of a borosilicate glass-filled porous network. The thickness of this layer depends on the chemical composition of the borosilicate waste form material because the oxidized components of the steel differ in solubility and because the viscosity of the molten waste form material, determining the diffusion rate of the components, varies with composition.
1 January 2019 in Bulletin of the South Ural State University Series "Chemistry"