In metalworking, rolling is a metal-forming process in which slab is passed through one or more pairs of the rolling dies to reduce the thickness and to make the thickness uniform. Modeling of rolling die contact with the slab primarily needs to describe the Tribology of contact phenomena. The central concern of numerical modeling is used in this work to indicate a set of equations, derived from the contact principle, that transfer the physical event into the mathematical equations. Continuum rolling contact phenomena is considered to explain how a contact region is formed between rolling die and slab and how the tangential force is distributed over the contact area with coefficient of friction. At the end, elasticity stress behavior of rolling die contact with the slab for a number of cyclic loads is modeled. The model includes new proposed constitutive equations for discontinuity of the velocity–pressure distribution in rolling contact from the entry side to exit side of the neutral point. To verify the model, finite element simulation and experimental data from the literature are considered. The results show good agreement with finite element simulation and experimental data.
The electro-discharge machining (EDM) process is investigated using deterministic and stochastic methods to determine and model the effects of process parameters on machining performance. The workpiece utilized for the investigation was an LM25 aluminum alloy reinforced with vanadium carbide (VC), processed through a stir casting technique. EDM process parameters like peak current, discharge voltage, and pulse on-time are considered to analyze material removal rate, electrode wearing rate, and surface roughness. This study applied four multi-criteria decision-making (MCDM) and analytical methodologies to evaluate EDM performance. Then, the MCDM scores were compared using two objective verification mechanisms. In this case, the teaching-learning-based optimization (TLBO) technique delivered the best-desired results relative to the VIKOR, Grey relational grade (GRG), and the response surface method (RSM). Also, the RSM and analytical methods are simpler than the other methods, though they produced nearly identical results as the sophisticated MDCM and deterministic methods.
3 September 2024 in Journal of Materials Engineering and Performance
Grain refinement and mechanical property enhancement of cast ingot aluminum 6061 alloy were achieved using equal-channel angular pressing (ECAP) at room temperature, employing route A and route R types. Analytical, finite element and experimental methods were utilized to investigate the alloy’s deformation behavior under the ECAP process. The tensile tests conducted at room temperature demonstrated a significant increase in strength with an increasing number of pressings, reaching 44.23, 53.19, and 56.7% for 1-pass, route A, and route R types 2-passes of the ECAP process, respectively. However, ductility, as indicated by elongation, gradually decreased after the first pressing. Electron backscatter diffraction was employed to reveal submicrometer grain sizes resulting from the ECAP process. The grain structure showed substantial improvement under route A and route R types at a 2-passes ECAP process. Wear tests conducted under loads of 10 and 25 N showed an increase in the coefficient of friction within the minimum wear loss intervals. Rockwell hardness also exhibited a significant increase of 119.3, 176.3, and 164.8% at 1-pass and 2-passes using routes R and A, respectively. As part of the evaluation, analytical models were computed using Python, and finite element simulations were performed using ABAQUS software. The results from analytical and finite element simulations demonstrated good agreement with the experimental data.
This study investigates the machinability of a novel LM25 aluminum alloy reinforced with vanadium carbide composite material (LM25Al/VC) using computer numerical control (CNC) lathe operation. By optimizing CNC lathe process parameters such as depth of cut, feed rate, and cutting speed, the aim is to maximize material removal rate, minimize surface roughness, reduce power consumption, and optimize costs. The study employs analytical modeling, deep neural networks (DNN), and grey relational grade (GRA) coupled with response surface methodology (RSM) for performance evaluation. The effectiveness of these methods was compared using four objective verification mechanisms. In this case, the DNN technique delivered superior results among the methods considered. Additionally, new analytical models and DNN programming were developed in this work to predict machining costs, power consumption, material removal rate, and surface finish quality. These findings contribute to creating energy-efficient, cost-effective machining techniques and promote sustainable practices in the manufacturing industry.