Microstructural changes in conductive materials induced by electric current treatments, such as electromigration and electroplasticity, are critical in semiconductor and metal processing. However, owing to the inevitable thermal effect (Joule heating), the athermal effect on microstructural modifications remains obscure. This paper presents an approach of utilizing pre-micromachined structures, which obstruct current flow but maintain a thermal history similar to that of the matrix, effectively disentangling the thermal and athermal effects. A duplex stainless-steel material is selected to validate the feasibility of this method. Microstructural characterizations show that the athermal effect, especially the electron wind force (EWF), primarily governs the element diffusion and phase transformation in this study. Moreover, many σ phases (Cr-enriched) are precipitated in the micromachined structures, whereas no precipitation occurred in the matrix, suggesting that the directional EWF disrupts the Cr aggregation caused by Joule heating. Furthermore, we present a critical formula for determining the dimensions of micromachined structures of commonly used metallic materials. The proposed method may serve as an effective and powerful tool for unveiling the athermal effect on microstructural alterations.
Water splitting is thermodynamically uphill reaction, hence it cannot occur easily, and also highly complicated and challenging reaction in chemistry. In electrocatalytic water splitting, the combination of oxygen and hydrogen evolution reactions produces highly clean and sustainable hydrogen energy and which attracts research communities. Also, fabrication of highly active and low cost materials for water splitting is a major challenge. Therefore, in the present study, γ-Fe2O3 nanowires were fabricated from highly available and cost-effective iron plate without any chemical modifications/doping onto the surface of the working electrode with high current density. The fabricated nanowires achieved the current density of 10 mA/cm2 at 1.88 V vs. RHE with the scan rate of 50 mV/sec. Stability measurements of the fabricated Fe2O3 nanowires were monitored up to 3275 sec with the current density of 9.6 mA/cm2 at a constant potential of 1.7 V vs. RHE and scan rate of 50 mV/sec.
1 October 2017 in International Journal of Fatigue