Natural macromolecule adsorbing materials are alternatives for remediation of heavy metals’ polluted waters. In this study, sodium alginate composite gel (SACL) was synthesized from sodium alginate (SA), polyethylene glycol oxide (PEO), and nanomaterials to remove wastewater Cu (II) and Cd (II). The adsorption efficiency of SACL was analysed in relation to the contact time, initial concentrations of metal ions, temperature, adsorbent dosage, and solution pH. Three models, i.e., kinetic model, isothermal adsorption model, and thermodynamic model, were used to fit the experimental data. Our results showed that the highest removal rates of Cu (II) and Cd (II) from wastewater were 96.8% and 78%, respectively, under the condition of the best liquid-solid ratio of 12.5 ml·g⁻¹, and the contact time of 180 min (25°C). Overall, the SACL adsorption of Cu (II) and Cd (II) was spontaneous. The adsorption kinetics and the isothermal adsorption were fitted well with the pseudo-second-order kinetic equation and Langmuir equation, respectively. Combined with SEM-EDS and FTIR analysis, results suggested that SACL adsorbs wastewater Cu (II) and Cd (II) mainly through chemical reaction on its surface area. Altogether, this work concludes on SACL as an efficient and ecofriendly adsorbent for wastewater Cu (II) and Cd (II).

Recently, replacing chemical fertilizers with straw returning and new fertilizers has received considerable attention in the agricultural sector, as it is believed to increase rice yield and improve soil properties. However, less is known about rice growth and soil properties in paddy fields with the addition of different fertilizers. Thus, in this paper, we investigated the effects of different fertilizer treatments, including no fertilization (CK), optimized fertilization based on the medium yield recommended fertilizer amount (OF), 4.50 Mg ha⁻¹ straw returning with chemical fertilizers (SF), 0.59 Mg ha⁻¹ slow-release fertilizer with chemical fertilizers (SRF), and 0.60 Mg ha⁻¹ water-soluble fertilizer with chemical fertilizers (WSF), on rice growth, yield, and soil properties through a field experiment. The results show that compared with the OF treatment, the new SF, SRF, and WSF treatments increased plant height, main root length, tiller number, leaf area index, chlorophyll content, and aboveground dry weight. The SF, SRF, and WSF treatments improved rice grain yield by 30.65–32.51% and 0.24–1.66% compared to the CK and OF treatments, respectively. The SRF treatment increased nitrogen (N) and phosphorus (P) uptake by 18.78% and 28.68%, the harvest indexes of N and P by 1.75% and 0.59%, and the partial productivity of N and P by 2.64% and 2.63%, respectively, compared with the OF treatment. However, fertilization did not significantly affect the average yield, harvest indexes of N and P, and partial productivity of N and P. The contents of TN, AN, SOM, TP, AP, and AK across all the treatments decreased significantly with increasing soil depth, while soil pH increased with soil depth. The SF treatment could more effectively increase soil pH and NH₄⁺-N content compared to the SRF and WSF treatments, while the SRF treatment could greatly enhance other soil nutrients and enzyme activities compared to the SF and WSF treatments. A correlation analysis showed that rice yield was significantly positively associated with tiller number, leaf area index, chlorophyll, soil NO₃⁻-N, NH₄⁺-N, SOM, TP, AK, and soil enzyme activity. The experimental results indicate that SRF was the best fertilization method to improve rice growth and yield and enhance soil properties, followed by the SF, WSF, and OF treatments. Hence, the results provide useful information for better fertilization management in the Chaohu Lake region of China.

The high concentration of arsenic (As) in paddy soil has seriously threatened the growth of rice and human food safety. Biological soil crusts (BSC), which are ubiquitous in paddy fields, have been shown a high ability to capture trace metal elements. In the present study, we investigated the effectiveness and mechanism of BSC for immobilizing As, and tested their potential to alleviate the stress of As on rice germination. It is found that BSC can remove 77.8% of arsenic in solution with 3.5 mg L^-1 initial As concentration. The As content in BSC reached 514.5 mg kg^-1 after 216 h exposure, and the entrapped As was mainly distributed in BSC as a non-EDTA-exchangeable fraction, which might be intracellularly accumulated. Proteobacteria and Bacteroidetes were the dominant phyla in BSC after being exposed to As, playing a significant role in tolerating As and As biogeochemical cycling. The presence of BSC notably promoted the germination rate (18.3%) and dry biomass (103.4%) of rice seeds under 3.5 mg L^-1 As stress while reducing the As content in plant roots (8.2-34.3%) and shoots (8.7-47.6%). These findings demonstrate that BSC have a great entrapping effect on As and highlight the importance of BSC in alleviating the stress on rice germination by As, providing a potential nature-based and low-cost strategy to decontaminate paddy fields polluted with As.

Sodium alginate (SA), polyvinyl oxide (PEO), and ceramic nanomaterials were used to prepare alginate composite gel. The present study examined the removal rate and adsorption capacity of alginate composite gel for removal of wastewater As(III), Pb(II), and Zn(II). Batch experiments were conducted to study the influence of experimental parameters such as pH and temperature, as well as the mechanism of As(III), Pb(II), and Zn(II) adsorption with the new adsorbent. The results showed the high efficiency of sodium alginate composite gel for removal of wastewater As(III), Pb(II), and Zn(II). Under the condition of the best liquid-solid ratio and the contact time, the removal rates of As(III), Pb(II), and Zn(II) were 67.42%, 95.31%, and 93.96%, respectively. The pseudo-second-order kinetic equation was superior to fit the adsorption kinetics process. The isothermal adsorption models of As(III) and Pb(II) fitted well with the Freundlich model, and Zn(II) fitted well with the Langmuir model. The results of SEM, EDS, XPS, and FTIR analyses revealed that the adsorption process occurred mainly via chemisorption. The results of the present study suggest that new adsorbents can be effectively utilized for As(III), Pb(II), and Zn(II) removal from water.