Samples of natural clinoptilolite were modified by an acid–thermal method at nitric acid concentrations of 0.25, 0.5, 1.0, and 3.0 M and a contact time of 30 min. A series of catalysts, K2PdCl4–Cu(NO3)2–KBr/S (S = 0.25H-CLI, 0.5H-CLI, 1H-CLI, and 3H-CLI) was obtained. All samples were investigated by X-ray phase and thermogravimetric analysis, FT-IR spectroscopy, water vapor ad/desorption and pH metric method. Besides, K2PdCl4–Cu(NO3)2–KBr/S samples were tested in the reaction of low-temperature carbon monoxide oxidation. It have been found that, owing to special physicochemical and structural-adsorption properties of 3H-CLI, it promotes formation of the palladium–copper catalyst providing carbon monoxide oxidation at the steady-state mode down to CO concentrations lower than its maximum permissible concentration at air relative humidity varied within a wide range.
Manganese oxide forms prepared by different methods differ by their compositions, phase ratios in polyphase samples, and crystallite sizes (XRD and TEM characterization). Among the phases, tunnel-structured β-MnO2 (pyrolusite), α-MnO2 (cryptomelane), ε-MnO2 (akhtenskite), and β-Mn2O3 (bixbyite) have been identified. Water vapor sorption isotherms showed substantial differences in the affinities of water molecules to oxide surfaces of the manganese oxide forms under study. The parameters of the BET equation and pore size distribution curves have been calculated. The manganese oxide forms have mesoporous structures characterized by uniform and non-uniform pore sizes as well as by moderate hydrophilic behavior.
Pillared clays (PILCs) are little-studied as supports in compositions of anchored metal complex catalysts. In the work, pillared clay, Al-PILC, was prepared by using Ukrainian natural bentonite, N-Bent, and the aluminum polycation, [Al13O4(OH)24(H2O)12]7+ (Al13), as an intercalating agent. The final product was used for preparing К2PdCl4–Cu(NO3)2–KBr/Al-PILC nanocatalysts by an impregnation method. Initial N-Bent and Al-PILC as well as the nanocompositions based on them were characterized by XRD, FT-IR spectroscopy, DTG–DTA, water vapor adsorption, and pH metry. К2PdCl4–Cu(NO3)2–KBr/\({\bar{\text{S}}}\) compositions (\({\bar{\text{S}}}\) were N-Bent or Al-PILC) were tested in the reaction of CO oxidation with air oxygen at temperature of 20 °C and a relative humidity of 67%. It has been found that the preliminary modification of natural bentonite by Al13 intercalation results in formation of the nanostructured catalyst with a crystallite size of 19 nm showing the maximum activity in the reaction under study at CPd(II) = 2.72 × 10−5 mol/g and copper(II) concentrations of 2.9 × 10−5 and 5.9 × 10−5 mol/g.
1 February 2009 in Russian Journal of Applied Chemistry
The physicochemical and structural characteristics of bazalt tuff were studied. The optimal conditions of its acid modification, at which the high-activity catalyst Pd(II)-Cu(II)-Br-/H-bazalt tuff of a low-temperature oxidation of carbon(II) oxide with air oxygen is formed, were determined.
21 May 2016 in Russian Journal of Physical Chemistry A