Zhanshan  Sun

Dr. Zhanshan Sun

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
MGMin Guo
Min Guo
QCQiang Chen
Qiang Chen
ZSZhanshan Sun
Zhanshan Sun
DSDi Sang
Di Sang
YFYun-qi Fu
Yun-qi Fu
A novel frequency-selective rasorber (FSR) with dual-band transmission and wideband absorption property is proposed in this letter. The FSR is a two-layer structure composed of a lossy resistive sheet at the top and a lossless bandpass frequency selective surface (FSS) at the bottom, separated by an air spacer. The element of the resistive sheet is a lumped-resistor-loaded metallic dipole with a dual-resonance structure inserted in the center. The dual-resonance structure is realized by three different series LC structures in parallel, based on the Foster reactance theorem. There are two impedance poles between the three impedance zeros of the series LCs, where two transparent windows can be obtained for the lossy resistive sheet. The bandpass FSS is a simple dual-band FSS by etching two slots with different shapes and dimensions in a metallic plane. The FSR has realized two transmission bands at 7.7 GHz and 12.6 GHz, and the band with $\rm \vert S11\vert < -10 dB$ is 3.7-11.1 GHz. The design has been validated by full-wave simulation and experimental measurement.

24 April 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
QCQiang Chen
Qiang Chen
MGMin Guo
Min Guo
DSDi Sang
Di Sang
ZSZhanshan Sun
Zhanshan Sun
YFYun-qi Fu
Yun-qi Fu
A resistive metasurface (RM) with anisotropic absorption/ transmission performances is developed and applied in the radar cross section (RCS) reduction of a patch array antenna. The RM is nearly transparent at the co-polarized operation band of antenna by using interdigital resonators (IRs), while becomes absorptive in the case of out-of-band or cross-polarized incidence. The RM is applied as the superstrate of the patch array antenna. The integrated antenna is of low profile of only 7.27 mm. In the case of the in-band co-polarized incidence, the degradation of the antenna gain due to the RM is only 0.7 dB; at cross-polarized or out-of-band co-polarized incidence, the antenna itself performs as the ground plane for the RM, and the whole integrated structure becomes an absorber to significantly reduce the RCS of the antenna. The co-polarized RCSR bandwidth is 5-9.1 GHz at the lower band and 11.4-16.1 GHz at the higher band and the cross-polarized RCSR bandwidth is 5.5-16.3GHz.

18 January 2019 in IEEE Access
Verified
Journal Article
Open access
MGMin Guo
Min Guo
ZSZhanshan Sun
Zhanshan Sun
DSDi Sang
Di Sang
XJXueqing Jia
Xueqing Jia
YFYunqi Fu
Yunqi Fu
Two frequency-selective rasorber (FSR) structures using novel centrosymmetric bended-strip resonator (CBSR) are proposed in this paper. Both FSRs consist of the resistive sheet layer and the bandpass FSS layer with an air gap in the middle. The resistive sheet layer is constructed by inserting the CBSR into the center of the resistor-loaded dipole. The CBSR resonates at the transmission band of the bandpass FSS and exhibits infinite impedance, which is used to realize high-transmittance performance at the transmission band. Full wave simulation results show that the transmission band of one FSR is above the absorption band (A-T FSR), while the transmission band of another FSR is below the absorption band (T-A FSR). The transmission band of the A-T FSR and T-A FSR are separately located at 12.76 GHz and 6.08 GHz with 0.66 dB and 0.13 dB insertion loss, and the corresponding absorption bands with absorption rate > 90% are located at 6.10-10.98 GHz and 9.04–15.94 GHz, respectively. The CBSR used in T-A FSR (M-CBSR) is a miniaturized design of the CBSR used in A-T FSR. Comparing with the CBSR structure, the electric length of the M-CBSR’s longer side is reduced about 50%, which is only 12.2% of the wavelength of the transmission band. Two prototypes are fabricated and measured to verify the absorption/transmission performance of the proposed FSRs. Measured results are in good agreements with simulated results, which evidently demonstrates the validity of the proposed design.

25 February 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
ZSZhanshan Sun
Zhanshan Sun
QCQiang Chen
Qiang Chen
MGMin Guo
Min Guo
YFYun-qi Fu
Yun-qi Fu
We design a low radar cross section (RCS) planar reflectarray antenna by using frequency selective rasorber. Due to the metal-backed configuration and focusing effect of the phase modulation surface, the RCS of a planar reflectarray antenna is generally quite high. Besides, out-of-band signal focused by the reflector may cause serious interference to the system and affect the performance of facilities. To reduce the RCS of the reflectarray and suppress out-of-band interference, the frequency selective rasorber (FSR) with a transmission window is designed and covered in front of the reflectarray. Simulation results show that the out-of-band RCS of the reflectarray is significantly reduced without affecting the radiation performance. To verify the benefits of the structure in antenna's radar cross section reduction (RCSR) and interference suppression, the reflectarray, FSR and horn antenna work at 8.9 GHz are designed, fabricated and measured. Measurement results show that the gain of the proposed low RCS reflectarray antenna has only 0.3 dB decrease compared with the gain of non-FSR configuration, meanwhile, the RCS of the proposed structure is remarkable reduced and the -10 dB RCSR is obtained from 4 to 12.5 GHz.

31 October 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
BWBo Wu
Bo Wu
RMRuiqi Mao
Ruiqi Mao
DSDi Sang
Di Sang
ZSZhanshan Sun
Zhanshan Sun
YLYi Liu
Yi Liu
YFYun-qi Fu
Yun-qi Fu
Rydberg atom, which exhibits a strong response to weak electric fields, is regarded as a promising atomic receiver to surpass sensitivity of conventional receivers. However, its sensitivity is strongly limited by the noise coming from both classical and quantum levels and how to enhance it significantly remains challenging. Theoretically, we strive to optimize the laser array and emphasize the significance of coherence among microwave signals, laser beams power uniformity in laser array for enhancing signal-to-noise ratio (SNR) and promoting the sensitivity to a new level. To enhance practical application mobility and integration, we propose two optimization schemes: six-port fiber-coupled vapor cell probe array and cascaded diffraction gratings. We maintain steady microwave signal coherence in the laser array by using identical vapor cells and positioning the probe lasers on the incident wave’s equal phase plane. Our findings reveal that the wavefront phase difference for the six-port fiber-coupled vapor cell array is 10 degrees, while the cascaded diffraction gratings show a 16 degree difference, with laser intensity uniformity reaching 90.4%. In our experiment, 4.6 dB SNR enhancement was achieved by utilizing the cascaded diffraction gratings to generate a 2×2 probe laser arrays compared to the performance of a laser beam, and it can be enhanced further just by adding more laser beams. In particular, a 2×2 laser array experimental verification yielded 19nv/cm/√Hz@8.57 GHz. More importantly, the intermediate signals of laser array maintain coherence. Therefore, SNR improvement is allowed even in detecting weak target signals amidst strong noise and clutter. The results could offer an avenue for the design and optimization of ultrahigh-sensitivity Rydberg atomic receivers and promote applications in cosmology, meteorology, communication, and microwave quantum technology.

27 December 2018 in IEEE Access
Verified
Journal Article
Open access
ZSZhanshan Sun
Zhanshan Sun
QCQiang Chen
Qiang Chen
MGMin Guo
Min Guo
HYHuiying Yu
Huiying Yu
YFYunqi Fu
Yunqi Fu