Ensuring the safety and reliability of freight wagons requires continuous monitoring of couplings such as hooks and buffers, which are prone to stress, wear, and misalignments. This paper proposes a vision-based 3D monitoring system which uses an RGB-D camera and a computer vision pipeline to estimate angular excursions and longitudinal displacements of wagon couplers during train operation. The proposed approach combines depth-based reconstruction with a normalized cross-correlation tracking algorithm, providing geometric measurements of coupling motion without physical contact. The system architecture integrates real-time acquisition and post-processing analysis to 3D reconstruct the geometric characteristics of wagon couplings under field conditions. Experimental tests performed on a T3000 articulated wagon allowed us to measure an angular excursion of approximately 9.8° for the hook and a longitudinal displacement of 17 mm for the buffer. The results show robustness and suitability for embedded implementation, supporting the adoption of vision-based techniques for safety monitoring in railways.
The development of digital twins for railway freight vehicles represents a key step toward more efficient, data-driven maintenance and safety assessment. This study focuses on the creation of a digital twin of the T3000 articulated freight wagon, one of the most widespread intermodal transport solutions in Europe. Despite its relevance, the dynamic behavior of this vehicle type has been scarcely investigated so far in scientific literature. A dedicated onboard measurement layout was defined to enable comprehensive monitoring of vehicle dynamics and the interactions between adjacent wagons within the train. The experimental setup integrates inertial sensors and a 3D vision system, allowing for detailed analysis of both rigid-body and vibrational responses under real operating conditions. A high-fidelity multibody model of the articulated wagon was developed and tuned using the acquired data, achieving optimal agreement with experimental measurements in both straight and curved track segments. The resulting model constitutes a reliable and scalable digital twin of the T3000 wagon, suitable for predictive simulations and virtual testing. Future developments will focus on a deeper investigation of the buffer interaction through an additional experimental campaign, further extending the digital twin’s capability to represent the full dynamic behavior of articulated freight trains.
19 December 2025 in Advances in Mechanical Engineering
This paper presents SIMTRAD or SIMulation of TRAin Dynamics, an innovative framework for simulating longitudinal dynamics of freight trains. The framework integrates detailed sub-models of locomotives, wagons, couplers, and adhesion dynamics inside a modular Simulink environment, thus enabling flexible and accurate simulation of train operations. In contrast to multibody software—which mainly address the overall dynamic behaviour of railway vehicles—SIMTRAD is tailored to capture the longitudinal interactions within the train. SIMTRAD enables detailed modelling of locomotives, wagons, braking systems, and couplers, offering broad and flexible application possibilities. The proposed methodology has been validated against established software, demonstrating consistency in predicting longitudinal compressive and tensile forces acting on train couplers. A case study has also been then conducted, with the aim to optimize freight train composition by minimizing in-train forces through the optimal placement of locomotives and payload distribution. The results highlighted reductions of 53% in the values of Longitudinal Tensile Forces (LTFs) and of 7% for the Longitudinal Compression Forces (LCFs), contributing to enhanced train performance and operational efficiency. This framework also supports future integration with Hardware-in-the-Loop systems, broadening its application to different scenarios across academic research and the industrial domain related to the railway sector.