The preparation of biodegradable mulch film with paper-based materials has become a significant focus in mulch film development due to the serious pollution caused by plastic mulch film. This study utilized the esterification cross-linking reaction of LA, PVA, and GA to coat the surface of paper as the substrate. FTIR, TGA, XRD, SEM, tensile testing, and oxygen, water vapor barrier performance tests were performed. The optimal conditions for film preparation were determined to be a 10 % PVA aqueous solution, 5 % GA content, and a PVA/LA/GA ratio of 1:2:1. The resulting film paper exhibited a dry strength of 6.52 kN/m, a wet strength of 0.23 kN/m, a tearing degree of 969.35 mN, a Cobb value of 12.04 g/m2, a water vapor transmission rate of 573.27 g m−2 24 h−1, and an oxygen transmission rate of 7.373 cm3 m−2 24 h−1. After a 6-week landfill degradation test, the film showed a degradation rate of 25.3 %, while still maintaining a tensile strength of 1.89 kN/m. Field application tests in greenhouses confirmed that the film paper facilitated the growth of strawberry, its mechanical and barrier properties suitable for a biodegradable paper mulch.
13 February 2024 in Nordic Pulp & Paper Research Journal
In the present study, a nanocellulose acetate and acrylate polymer composite membrane was formed by the phase transfer technique. The physical and mechanical properties, water flux, and desalination performance of the achieved composite membrane were investigated. When 3 % (w/w) acrylate polymer, 10 % acetylated nanocellulose, and 0.3 % mass fraction of TiO2 were used for the formation of the membrane, the obtained product could reach a tensile strength of 1.97 N/mm2 and a pure water flux of 51 L/(m2 h). Moreover, the composite membrane achieved a desalination rate of 92.4 %. Thus, the obtained composite membrane could meet the performance requirements for the treatment of industrial wastewater.