Spin waves, the collective excitations of spins, can emerge as nonlinear solitons at the nanoscale when excited by an electrical current from a nanocontact. These solitons are expected to have essentially cylindrical symmetry (that is, s-like), but no direct experimental observation exists to confirm this picture. Using a high-sensitivity time-resolved magnetic X-ray microscopy with 50 ps temporal resolution and 35 nm spatial resolution, we are able to create a real-space spin-wave movie and observe the emergence of a localized soliton with a nodal line, that is, with p-like symmetry. Micromagnetic simulations explain the measurements and reveal that the symmetry of the soliton can be controlled by magnetic fields. Our results broaden the understanding of spin-wave dynamics at the nanoscale, with implications for the design of magnetic nanodevices.
True random number generators are of great interest in many computing applications, such as cryptography, neuromorphic systems, and Monte Carlo simulations. Here, we investigate perpendicular magnetic-tunnel-junction nanopillars (pMTJs) activated by short-duration (nanosecond) pulses in the ballistic limit for such applications. In this limit, a pulse can transform the Boltzmann distribution of initial free-layer magnetization states into randomly magnetized down or up states, i.e., a bit that is 0 or 1, easily determined by measurement of the tunnel resistance of the junction. It is demonstrated that bit streams with millions of events: (1) are very well approximated by a normal distribution; (2) pass multiple statistical tests for true randomness, including all the National Institute of Standards and Technology tests for random number generators with only one xor operation; (3) can be used to create a uniform distribution of 8-bit random numbers; and (4) can have no drift in the bit probability with time. The results presented here show that pMTJs operated in the ballistic regime can generate true random numbers at around 50-MHz bit rates, while being more robust to environmental changes, such as their operating temperature, compared to other stochastic nanomagnetic devices.
A Process Design Kit (PDK) has been developed to realize complex integrated circuits in Silicon Carbide (SiC) bipolar low-power technology. The PDK development process included basic device modeling, and design of gate library and parameterized cells. A transistor–transistor logic (TTL)-based PDK gate library design will also be discussed with delay, power, noise margin, and fan-out as main design criterion to tolerate the threshold voltage shift, beta ( ) and collector current ( ) variation of SiC devices as temperature increases. The PDK-based complex digital ICs design flow based on layout, physical verification, and in-house fabrication process will also be demonstrated. Both combinational and sequential circuits have been designed, such as a 720-device ALU and a 520-device 4 bit counter. All the integrated circuits and devices are fully characterized up to 500 °C. The inverter and a D-type flip-flop (DFF) are characterized as benchmark standard cells. The proposed work is a key step towards SiC-based very large-scale integrated (VLSI) circuits implementation for high-temperature applications.
Ring oscillators (ROs) are used to study the high-temperature characteristics of an in-house silicon carbide (SiC) technology. Design and successful operation of the in-house-fabricated 4H-SiC n-p-n bipolar transistors and TTL inverter-based 11-stage RO are reported from 25 °C to 600 °C. Non-monotonous temperature dependence was observed for the oscillator frequency; in the range of 25 °C to 300 °C, it increased with the temperature (1.33 MHz at 300 °C and V CC =15 V), while it decreased in the range of 300 °C-600 °C. The oscillator output frequency and delay were also characterized over a wide range of supply voltage (10 to 20 V). The noise margins of the TTL inverter were also measured; noise margin low (NM L ) decreases with the temperature, whereas noise margin high (NM H ) increases with the temperature. The measured power-delay product (P D · T P ) of the TTL inverter and 11-stage RO was ≈ 4.5 and ≈285 nJ, respectively, at V CC =15 V. Reliability testing indicated that the RO frequency of oscillation decreased 16% after HT characterization.
Magnetic tunnel junction (MTJ) spin torque oscillators (STOs) have shown the potential to be used in a wide range of microwave and sensing applications. To evaluate the potential uses of MTJ STO technology in various applications, an analytical model that can capture MTJ STO's characteristics, while enabling system- and circuit-level designs, is of great importance. An analytical model based on macrospin approximation is necessary for these designs since it allows implementation in hardware description languages. This paper presents a new macrospin-based, comprehensive, and compact MTJ STO model, which can be used for various MTJ STOs to estimate the performance of MTJ STOs together with their application-specific integrated circuits. To adequately present the complete model, this paper is divided into two parts. In Part I, the analytical model is introduced and verified by comparing it against measured data of three different MTJ STOs, varying the angle and magnitude of the magnetic field, as well as the DC biasing current. The proposed analytical model is suitable for being implemented in Verilog-A and used for efficient simulations at device, circuit, and system levels. In Part II, the full Verilog-A implementation of the analytical model with accurate phase noise generation is presented and verified by simulations.