This study aimed to explore the effects of nucleate agent sizes on lysozyme crystallization. Silica nanoparticles (SNP) with four different particle sizes of 5 nm, 15 nm, 50 nm, and 100 nm were chosen for investigation. Studies were carried out both microscopically and macroscopically. After adding SNP, the morphological defects of lysozyme crystals decreased, and the number of crystals increases with the size of the SNP. The interaction between SNP and lysozyme was further explored using UV spectroscopy, fluorescence spectroscopy, and Zeta potential. It was found that the interaction between SNP and lysozyme was mainly electrostatic interaction, which increased with the size of SNP. As a result, lysozyme could be attracted to the surface of SNP and aggregated to form the nucleus. Finally, the activity test and circular dichroism showed that SNP had little effect on protein secondary structure.
Lost circulation in fractured formations remains challenging for oil-based drilling fluids because conventional rigid bridging materials can be sensitive to fracture geometry and form porous seals. In this study, an oil-absorbing swelling gel plugging agent (OSGP) was prepared by water-in-oil emulsion free-radical polymerization. Its oil-induced swelling, strain-dependent viscoelasticity, and bidirectional fracture-sealing behavior were evaluated together with morphology and thermal mass-loss behavior. After 12 h in white oil at 120 °C, the particle volume increased by 19.2%. At 25 °C, OSGP showed an elastic-dominant response with strain-induced softening. In independent fracture-sealing tests at 120 °C, OSGP formed pressure-bearing seals in both 3 mm parallel and 3 mm-to-1 mm wedge-shaped steel fractures, with a maximum forward breakthrough pressure of 8.06 MPa. Comparison of forward and reverse tests showed that fracture geometry and flow direction strongly affected pressure-bearing behavior. The combined results support a proposed sealing process involving particle bridging, oil-induced swelling, deformation, and compaction. OSGP therefore shows potential for further evaluation as a lost-circulation material in fully formulated oil-based drilling fluids and rock fractures.