Adhesive-bonded joints made up of composite materials offer complex structures with the ease of joining similar or dissimilar materials. The failure behavior of adhesive-bonded joints is influenced largely by geometrical parameters (overlap length and adhesive thickness) and adherend surface preparations. The glass fiber-reinforced epoxy composites are prepared for single-lap adhesive joints to know their strength with different sets of geometrical factors. The adherend surfaces of composites are roughened to 2 ± 0.1 µm, prior to joint preparation. Taguchi L9 experimental matrix representing different combinations of overlap length and adhesive thickness is employed to know the behavior of failure load (FL) and shear strengths (SS) of the adhesive-bonded single-lap composite joints. The results showed that the impact of overlap length of adhesive-bonded joints is more compared to that of adhesive thickness. The interaction effects of geometrical parameters are found negligible toward both the outputs. The optimal factor levels received the highest load to fracture; the joints are found equal to 6096.1 N for FL and 80 MPa for SS, respectively. The empirical relationship based on multiple linear regression (MLR) equations is derived for both the failure load and shear strength. Levenberg–Marquardt algorithm-trained neural networks (NNs) are used for the prediction of both responses. Ten experimental cases are used to check the prediction capabilities of both MLR and NNs. The mean absolute percent error in prediction of both the responses is found equal to 2.27% for NNs and 3.12% for MLR. The NNs and MLR results in accurate prediction might be due to the model development process based on experimental input–output data, rather than assumption-based theoretical and numerical methods.
1 January 2019 in International Journal of Computational Materials Science and Surface Engineering
In recent past, adhesive bonding gain much attention world-wide in joining of engineered parts namely, automotive and aerospace structures. The strength of adhesive bonded composite joints is studied by conducting experiments based on the matrices of central composite design. The collected data was analysed using response surface methodology. The mathematical model was established to express the load carrying capacity and joint strength as a function of input variables. Further, analysis of variance was carried out to ensure good fit to the experimental data. Moreover, the statistical methods determine significant interaction effects among the factors. Finally, genetic algorithm was used to locate the optimum points of joint strength for the set of inputs, i.e., 40 mm overlap length, 0.2 mm adhesive thickness and 4.526 μm surface roughness. The results showed that adhesively bonded single lap joints strength was influenced by overlap length (8%), adhesive thickness (78.56%), and surface roughness (1.43%). Statistical experimental design techniques were found to be useful in understanding the complex relationships seen in the data, and also in interpreting the results.
1 January 2019 in International Journal of Materials Engineering Innovation
This paper presents a study on joint strength of adhesively bonded single lap glass fibre reinforced composite (GFRC). Taguchi L27 orthogonal array with four factors (adhesive thickness, overlap length, surface roughness, and adherend thickness) operating at three levels was used for conducting experiments and recorded the failure load and shear strength data. The results reveal that, adhesive thickness being the most dominant and surface roughness has less dominant on failure load and shear strength of composite joints. Multi objective particle swarm optimisation based on crowding distance (MOPSO-CD) was used to optimise the bi-objective functions simultaneously under the input variable constraints. The fitness value obtained for bi-objective functions were found to be close to unity (0.944). The confirmation tests were conducted for optimised conditions to know the appropriateness of MOPSO-CD tool. It has been found that at the optimised conditions the improvement is 52.94% and 61.12% respectively, for failure load and shear strength.
15 March 2023 in Journal of Mines, Metals and Fuels
The objective of this review paper is to highlight some of the noteworthy research that has been done on the use of nanoparticles (NPs) to improve the performance of adhesively bonded joints (ABJs) against delamination initiation and propagation. Various nanoparticle applications, such as carbon-based, ceramic-based, and mineral-based nanoparticles, are covered. Interlaminar shear strength, fracture toughness, and fracture energy are the major parameters that have been considered for enhancing FRP delamination and fatigue resistance.The reported results indicatethat the inclusion of NPs in polymeric matrices leads to improvement of various material properties,even though some discrepancies in the results have been noted. Notwithstanding, additional researchis required to address some of the issues that have not yet been tackled.