16 February 2024 in Journal of Nanomaterials
Synthetic organic dyes are coloring agents used in various industries. Despite the fact that they offer exciting colors and long-lasting effects, certain organic dyes can have harmful impacts on human health and aquatic ecosystems. This study investigates the photocatalytic degradation of malachite green dye using NiTiO2 nanoparticles (NPs) and NiTiO2/PANI nanocomposites (NCs) in various reaction conditions. The surface and compositional change of synthesized photocatalysts were characterized by XRD, FTIR, AAS, and UVvis spectrophotometer. Accordingly, the XRD results signify the crystal structure of photocatalysts found to be tetragonal anatase phase while the FT-IR spectra indicate the titanium has predominantly form a coordination compound upon reaction with nitrogen atom through weakening the bond strength between CN, CC, and CN in the PANI. The UVvis measurement shows that the energy bandgaps were decreased from 3.20 to 2.77eV and 2.59eV for NiTiO2 NPs and NiTiO2/PANI NCs, respectively. From AAS data, the authors confirmed that Ni metal has significantly existed in the aforementioned photocatalysts after the calcination process. The photocatalytic degradation of NiTiO2 NPs and NiTiO2/PANI NCs on the model dye has studied and their efficiency was 94.22 and 99.09, respectively. The photocatalytic degradation follows pseudo-first order with 2.2310−2min−1 reaction rate at optimum conditions of pH 8.5, initial dye concentration of 0.2g/L, catalyst load of 0.2g/L, and irradiation time of 90min. With this, the outstanding result recorded using NiTiO2/PANI NCs is ascribed to the smaller particle size as compared to NiTiO2 NPs, and it is found to be the promising photocatalyst for the removal of wastewater containing organic dyes.
7 November 2023 in AQUA — Water Infrastructure, Ecosystems and Society
Magnetite-diatomite nanocomposite was synthesized through co-precipitation methods as an effective Cr(VI) removal adsorbent. The properties of diatomite, thermochemically modified diatomite (TMD), and magnetic–diatomite nanocomposite (MDN) were investigated using Fourier-transform infrared spectroscopy, X-ray diffraction analysis, Brunauer–Emmett–Teller, and complete silicate chemical analysis. The MDN shows 98.89% adsorption removal at optimized conditions using the response surface methodology of Box–Behnken Design. The kinetic data for Cr(VI) sorption on MDN were well described by pseudo-second order, which indicates the Cr(VI) adsorption was mainly due to chemisorption. The isotherm data show that the Langmuir and Freundlich models better described Cr(VI) ion sorption data. The thermodynamic parameters ΔG°, ΔH°, and ΔS° were estimated, and the results indicate Cr(VI) sorption on MDN was a spontaneous (ΔG° < 0) and exothermic process (ΔH° < 0). The proper Fe3O4 loading into TMD improves the gram susceptibility (Xg) of MDN for magnet separation. The regeneration of nanocomposite material revealed over 80% Cr(VI) removal efficiency after five consecutive adsorption–desorption cycles. The produced MDN was tested for the removal of Cr(VI) from real tannery wastewater. The obtained results suggest the possibility of using this nanocomposite as an effective, efficient adsorbent to remove Cr(VI) laden wastewater.
25 January 2023 in Water Practice & Technology
Heavy metals pollution of both surface and groundwater sources of sub-Saharan Africa is alarmingly increased due to unplanned urban populations. Inadequate policies for water management, political commitment, and financial resources forced 65% of rural communities of sub-Saharan Africa to live in economic water stress areas. Sugarcane bagasse (SCB) shows high heavy metals (HMs) adsorption capacity (20–700 mg/g) through chemical entrapments to carbon-oxygen containing functional group and interior pore filling of porous surface. Various modifications like a physical/thermal, chemical, and composite form of bagasse show better adsorption performance for HMs removal. Kinetic and isotherm studies of HMs adsorption equilibrium data over SCB show that both Langmuir and Freundlich adsorption isotherms (cooperative adsorption) as the main adsorption mechanism. In addition, SCB shows potential bio-adsorbent properties for the selective adsorption of target HMs based on their physicochemical properties and shows good repeatability in acid environments. It is believed that information on this review will shed light on the current and future prospects of raw and modified SCB for HMs adsorption removal capacity. Sugarcane bagasse shows a remarkable selectivity for HMs adsorption removals based on their physicochemical properties and shows good potential capability for future utilizations in real wastewaters of developing countries.