Ali Abdulqader Bin-Salem

Dr. Ali Abdulqader Bin-Salem

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2021 in IEEE Access
Verified
Journal Article
Open access
ABAbdullah Ahmed Bahashwan
Abdullah Ahmed Bahashwan
MAMohammed Anbar
Mohammed Anbar
IHIznan Hasbullah
Iznan Hasbullah
Ziyad R. AlashhabZiyad R. Alashhab
Ziyad R. Alashhab
ABAli Abdulqader Bin-Salem
Ali Abdulqader Bin-Salem
Internet Protocol version six (IPv6) is equipped with new protocols, such as the Neighbor Discovery Protocol (NDP). NDP is a stateless protocol without authentication that makes it vulnerable to many types of attacks, such as Router Advertisement (RA) and Neighbour Solicitation (NS) DoS flooding attacks. In these types of attacks, attackers send an enormous volume of abnormal NDP traffic, which causes congestion that degrades network performance. The expected behavior among these attacks is the existence of NDP traffic abnormalities. Thus, this research aims to propose a flow-based approach to detect abnormal NDP traffic behavior, which is considered an indicator of the presence of NDP-based attacks, such as RA and NS DoS flooding attacks. Also, the proposed approach relies on flow-based network traffic representation and adoption of the Entropy algorithm to detect the randomness in the network traffic. The proposed approach is evaluated in terms of detection accuracy, precision, recall, and F1-Score using a simulated dataset. The experimental result shows that the proposed approach obtained 98.1%, 55%, 100%, and 70.96% for average accuracy, precision, recall, and F1-Score, respectively, in detecting abnormal NDP traffic behavior caused by the RA DoS flooding attack. Meanwhile, the proposed approach obtained 99%, 91.3%, 100%, and 95.45% for average accuracy, precision, recall, and F1-Score, respectively, in detecting the abnormal NDP traffic behavior caused by the NS DoS flooding attack. Also, the proposed approach shows better results compared to other existing approaches.

1 October 2018 in Vehicular Communications
Verified
Journal Article
Closed access
SHSabri M. Hanshi
Sabri M. Hanshi
Tat-Chee WanTat-Chee Wan
Tat-Chee Wan
MKMohammad M. Kadhum
Mohammad M. Kadhum
ABAli Abdulqader Bin-Salem
Ali Abdulqader Bin-Salem

1 January 2012 in IETE Technical Review
Verified
Journal Article
Closed access
ABAli Abdulqader Bin-Salem
Ali Abdulqader Bin-Salem
Tat-Chee WanTat-Chee Wan
Tat-Chee Wan

1 December 2019
Verified
Conference Paper
Closed access
ABAli Abdulqader Bin-Salem
Ali Abdulqader Bin-Salem
SBSalah Bindahman
Salah Bindahman
SHSabri M. Hanshi
Sabri M. Hanshi
WMWaddah Munassar
Waddah Munassar
KAKhaled Aladhal
Khaled Aladhal
The Internet of Things (IoT) connects huge numbers of objects together, then monitors and gathers data on machines and human life. Since energy efficiency and delay time reduction are of the highest importance to the IoT devices and control data, power consumption and delay issues are the most recent and primary challenges in IoT environment, where the research works and IoT-related standards have been focused on [1]. For example, the IoT environment provides a global connectivity by connecting a huge number of smart phones and embedded devices for the simplification of life through being sensitive, adaptive, and responsive to human needs. Such devices transfer lightweight data over long periods and are located in hard-to-reach places, where is difficult to deploy a source of power to handle these devices over a long coverage area. This situation requires a source of power and a technique to handle all these devices over large coverage areas, which are not guaranteed and difficult to deploy it. Thus, a new paradigm called Low Power Wide Area networks (LPWAN), similar to Long Term Evolution Machine Type Communications Category M1 (LTE MTC Cat-M1 and Narrow Band IoT (NB-IoT), should be adopted in integrating and extending the achieved gains for solving these issues that shape the power consumption with a large coverage area of tens of billions of devices [2]. LPWAN is defined for solving these issues by using a DRX/eDRX mechanism; however, the existing DRX models are partially inconsistent with 4G. The purpose of this research is to propose a framework that improve the power saving efficiency while maintaining the ability to guarantee the delay requirement for achieving a better lifetime of IoT devices. Hence, it will save expended resources that could have been exhausted on the cost replacement and maintenance.

22 July 2025 in Mobile Networks and Applications
Verified
Journal Article
Closed access
PDF file
ABAbdullah Ahmed Bahashwan
Abdullah Ahmed Bahashwan
MAMohammed Anbar
Mohammed Anbar
SMSelvakumar Manickam
Selvakumar Manickam
Taief Alaa Al-AmiedyTaief Alaa Al-Amiedy
Taief Alaa Al-Amiedy
MAMohammad Adnan Aladaileh
Mohammad Adnan Aladaileh
ABAli Abdulqader Bin-Salem
Ali Abdulqader Bin-Salem

2 February 2022 in EURASIP Journal on Wireless Communications and Networking
Verified
Journal Article
Open access
PDF file
ABAli Abdulqader Bin-Salem
Ali Abdulqader Bin-Salem
Tat-Chee WanTat-Chee Wan
Tat-Chee Wan
Hamad NaeemHamad Naeem
Hamad Naeem
MAMohammed Anbar
Mohammed Anbar
SHSabri M. Hanshi
Sabri M. Hanshi
ARAbdellah Redjaimia
Abdellah Redjaimia
Link adaptation (LA) is the ability to adapt the modulation scheme (MS) and the coding rate of the error correction in accordance with the quality of the radio link. The MS plays an important role in enhancing the performance of LTE/LTE-A, which is typically dependent on the received signal to noise ratio (SNR). However, using the SNR to select the proper MSs is not enough given that adaptive MSs are sensitive to error. Meanwhile, non-optimal MS selection may seriously impair the system performance and hence degrades LA. In LTE/ LTE-A, the LA system must be designed and optimized in accordance with the characteristics of the physical (e.g., MSs) and MAC layers (e.g., Packet loss) to enhance the channel efficiency and throughput. Accordingly, this study proposes using two LA models to overcome the problem. The first model, named the cross-layer link adaptation (CLLA) model, is based on the downward cross-layer approach. This model is designed to overcome the accuracy issue of adaptive modulation in existing systems and improve the channel efficiency and throughput. The second model, named the Markov decision process over the CLLA (MDP-CLLA) model, is designed to improve on the selection of modulation levels. Besides that, our previous contribution, namely the modified alpha-Shannon capacity formula, is adopted as part of the MDP-CLLA model to enhance the link adaptation of LTE/LTE-A. The effectiveness of the proposed models is evaluated in terms of throughput and packet loss for different packet sizes using the MATLAB and Simulink environments for the single input single output (SISO) mode for transmissions over Rayleigh fading channels. In addition, phase productivity, which is defined as the multiplication of the total throughput for a specific modulation with the difference between adjacent modulation SNR threshold values, is used to determine the best model for specific packet sizes in addition to determine the optimal packet size for specific packet sizes among models. Results generally showed that the throughput improved from 87.5 to 89.6% for (QPSK $$\rightarrow$$ → 16-QAM) and from 0 to 43.3% for (16-QAM $$\rightarrow$$ → 64-QAM) modulation transitions, respectively, using the CLLA model when compared with the existing system. Moreover, the throughput using the MDP-CLLA model was improved by 87.5–88.6% and by 0–43.2% for the (QPSK $$\rightarrow$$ → 16-QAM)and (16-QAM $$\rightarrow$$ → 64-QAM) modulation transitions, respectively, when compared with the CLLA model and the existing system. Results were also validated for each model via the summation of the phase productivity for every modulation at specific packet sizes, followed by the application one-way analysis of variance (ANOVA) statistical analysis with a post hoc test, to prove that the MDP-CLLA model improves with best high efficiency than the CLLA model and the existing system.