Piezoelectric vibration energy harvester (PVEH) is a promising device for sustainable power supply of wireless sensor nodes (WSNs). PVEH is resonant and generates power under constant frequency vibration excitation of mechanical equipment. However, it cannot output high power through off-resonance if it has frequency offset in manufacturing, assembly and use. To address this issue, this paper designs and optimizes a PVEH to harvest power specifically from grid transformer vibration at 100 Hz with high power density of 5.28 μWmm−3g−2. Some resonant frequency modulation methods of PVEH are discussed by theoretical analysis and experiment, such as load impedance, additional mass, glue filling, axial and transverse magnetic force frequency modulation. Finally, efficient energy harvesting of 6.1 V output in 0.0226 g acceleration is tested in grid transformer reactor field application. This research has practical value for the design and optimization process of tunable PVEH for a specific vibration source.
A method based on ferroelectric dipole to enhance surface charge density of triboelectric generator was proposed. By using the ferroelectric properties of polyvinylidene fluoride (PVDF), a positive charge trap was formed in the triboelectric layer to enhance the electric generating performance of the triboelectric material, so as to improve the surface charge density of the triboelectric nanogenerator. The PVDF film was fabricated by casting and uniaxial tensile process, and integrated into the triboelectric nanogenerator with vertical separation structure. The influences of the embedding direction, thickness and polarization intensity of the PVDF film on the output of the triboelectric nanogenerator were systematically studied. The results showed that the embedded PVDF piezoelectric film with a thickness of 100 µm and a maximum polarization electric field of 90 MV/m increased the peak power of the triboelectric nanogenerator by 2.6 times. This work has provided a new insight into regulating the properties of the triboelectric nanogenerator.
Tree-induced single-phase high-impedance faults (THIFs) threaten the reliability of distribution networks because their fault currents typically fall below the operating thresholds of conventional overcurrent relays. Accurately identifying tree species based on fault records is crucial for implementing differentiated vegetation management; however, the limited size of sample sets obtained from field experiments leads to severe overfitting in deep learning models. This paper proposes a framework that integrates physics-guided and data-driven approaches. First, a branch utilizing manually designed physical features extracts time-domain and frequency-domain metrics, while a MiniRocket branch captures multi-resolution temporal patterns. A bootstrap-based stability selection procedure is employed to retain discriminative features, and a rigorous “leave-one-file-out” cross-validation (LOFO-CV) scheme is used to train a strongly regularized Ridge classifier. Additionally, ablation studies are conducted to compare the feature information content at sampling rates of 100 kHz and 10 kHz under the experimental conditions. Finally, a carbonization degradation index (CDI) threshold is proposed. Experiments involving 37 fault records across five tree species demonstrate that the Hybrid + Ridge method achieves a file-level F1 score of 97.3%, achieving a file-level F1 of 97.3%, higher than standalone handcrafted features and MiniRocket.