In juice processing, ultrasound treatment has been tested as a potential alternative to conventional thermal methods to inactivate microorganisms and to enhance the nutritional status of juice. In this study, the impact of pasteurization and high-power ultrasound treatment on the quality of red grape juice was investigated in terms of the content of bioactive compounds such as phenolic compounds and l-ascorbic acid as well as regarding the microbiological and physicochemical properties. The grape juice was subjected to pasteurization (80 °C, 2 min) as well as to ultrasound treatment with an amplitude of 50 and 70% for 5 and 10 min. The results indicated the same level of total phenolic content for pasteurized and sonicated samples for 10 min with an amplitude of 70%, while the highest level of l-ascorbic acid was recorded for sonicated samples with an amplitude of 70% for 10 min. pH of sonicated samples decreased with amplitude and treatment time while total soluble solids and titratable acidity increased with amplitude and time. Moreover, the results indicated the usefulness of juice sonication to enhance the inactivation of microorganisms. Thus, the high-power ultrasound treatment might represent a viable technique to replace the conventional thermal treatment in grape juice processing.
Precision hard turning (HT) gained more and more attention in the cutting industry in the last years due to continuous pressure of the global market for reducing costs, minimizing the environmental and health issues, and achieving a cleaner production. Therefore, dry cutting and minimal quantity lubrication (MQL) became widely used in manufacturing to meet the environmental issues with respect to harmful cutting fluids (CFs). Vegetable oils, in MQL machining, are a promising solutions to petroleum-based CFs; however, the effects and performance on surface roughness and tool wear in HT with ceramic inserts remain unclear. To address this limitation, hardened AIDI D2 steel and pure corn oil, rich in saturated and monounsaturated fatty acids, cheap and widely available, have been used to conduct dry and MQL experiments at different cutting speed and feeds. Results show that corn oil is suitable as cutting lubricant in HT, creating a strong anti-wear and anti-friction lubricating film which improves the roughness with 10–15% and tool life with 15–20%, therefore reducing costs. Best surface roughness values (Ra = 0.151 μm, Rz = 0.887 μm, Rpk = 0.261 μm) were obtained at 180 m/min and 0.1 mm/rev. The analysis of variance shows that corn oil has statistical significance on roughness, validating the results.
19 June 2021 in RECENT - REzultatele CErcetărilor Noastre Tehnice
The profit of organizations can be increased by approaching the financing for private actors through the Regional Operational Program (ROP). Different projects were funded and implemented in the Brașov County, regarding the field of health and/or medical industry. This analysis was carried out according to the effective systematization of the services and innovative products obtained, to achieve the objectives, the indicators and results provided for in the projects. Following the implementation, a number of 5 projects from the Brașov County were chosen, as examples of good practice in this specific field. The analysis carried out includes the results obtained and efficiency solutions, using the PRO-EPF Tools, a specific reference framework created for the assessment of sustainability, formulating and placing in a matrix of a series of indicators.
Changing economic environment, innovative production technologies and the need to obtain relevant information in decisionmaking, management determines the organizations to seek different approaches to identify economies of scale. Economies of scale are manifested as an effect of cost reduction. The article proposes a comparative analysis of two methods of establishing costs that allow the identification and quantification of economies of scale. The research proposes a distribution of indirect costs depending on the cause-effect relationship between activity and product. The research results show a cost difference in the case of implementing the Activity-based costing (ABC) cost system, thus recognizing the usefulness and compatibility of the method.