The results of high-field terahertz transmission experiments on -doped silicon (carrier concentration of ) are presented. We use terahertz pulses with electric field strengths up to and a pulse duration of 700 fs. A huge transmittance enhancement of times is observed with increasing of the terahertz electric field strengths within the range of .
The evolution of silicon surface (111) induced by a single femtosecond laser pulse (350 fs, 1028 nm) at near-threshold fluences in viscous liquid is investigated by SEM and AFM. Depending on the deposited energy, the near-surface layers undergo several transformations that generally resulted in controlled formation of simple and complex bowl-shaped surface microcavities at nanoscale depths, surrounded by characteristic rims. At fluences below the ablation threshold, a 2-nm-depth microcavity is observed. The embedded microcavity has the form of an ultra-smooth paraboloid with a roughness ∼0.1 nm rms. Its formation is associated with a flow of melt from the center to the edges due to surface tension variations induced by a single Gaussian-shaped femtosecond laser pulse above the melting threshold. Similar microcavities with depths up to 4 nm are also observed with an increasing fluence. However, at higher fluences complex microcavities, characterized by a central sub-nanostructured region (with a roughness ∼0.5 nm rms) encircled with a crown-like rim of ∼5 nm height and ∼50 nm width (at FWHM), are found. The carried out experiments clearly demonstrate the surrounding medium to play a crucial role in producing of smooth and nanostructured surface microcavities at nanoscale depths with single femtosecond laser pulses.
The shock compression of magnesium (Mg-4Al-2Zn) alloy polycrystalline films on glass under ultrashort loads driven by sub-picosecond laser pulses was investigated. The continuous diagnostics of motion and reflectivity changes of the free rear surface of the samples was carried out in the picosecond range (≤200 ps) in a single pulse mode using ultrafast spectral interferometry. We present the data on elastoplastic shock wave evolution at a propagation distance of several hundreds of nanometers, elastic precursor decay, shear, and tensile strengths at the extreme strain rate of ∼109 s−1.
We report on a new technique of silicon surface nanostructuring in liquid with a pair of Gaussian-shaped femtosecond laser pulses. The bubble, generated in liquid near the molten silicon surface by the first pulse, serves as a dynamic microscale obstacle for spatial modulation of the intensity profile of the second pulse following at a certain delay via scattering processes. As a result, the circular ripple patterns with anomalously high surface-relief modulation, undersurface annular nanocavities, and interfacial smoothness are produced at the surface. The possibility of the control over the specific pattern through the laser intensity variation is shown.
Information on the rapidly increasing use of modification of solid-state materials surfaces by femtosecond laser pulses at moderate intensities (around 0.1–10 TW/cm2) is presented as applied to...