Ocean-moored buoys play an important role in global ocean environment monitoring. Motivated by building a sustainable ocean buoy observational network, a spatial optimization approach is proposed to site buoy stations to maximize spatial monitoring efficiency (SME). To achieve this goal, a non-linear, continuous maximum coverage location model named CMCP-Ocean was established, associated with a measurement method of the SME. Meanwhile, a heuristic framework based on the particle swarm optimization (PSO) algorithm was built to solve the CMCP-Ocean model, and optimization strategies including the multi-core parallel computing strategy, the particle velocity updating strategy based on spatial matching, and two potential station selection strategies related to the centroid-based random radiation method (CRRM) and random grid division method (RGDM) were established to improve computing performance. The effectiveness and efficiency of the PSO-based algorithm and the CMCP-Ocean model were verified by a series of experiments; the proposed computing schema named PSO-for-CMCP-Ocean has also proven to be practical and efficient. Finally, the PSO-for-CMCP-Ocean was applied to the buoy station selection of water mass monitoring in the Laizhou Bay of China, and a multi-scale sustainable site planning solution is reported.
30 November 2021 in IEEE Transactions on Instrumentation and Measurement
In this work, we firstly used a new two-dimensional (2D) semiconductor material Bi2O2Se for optical-fiber SPR sensor sensitization, proposed and validated a U-shaped optical-fiber SPR sensor with Au film- Bi2O2Se Sandwich structure. The finite element simulation results illustrate that the electric field strength on the surface is 2.08 times higher than that of the pure Au film, which excites a stronger SPR phenomenon thus leading to a high sensitivity of the sensor. The effect of the Radius on the sensor performance was investigated, and the optimal structural parameters were derived to fabricate the sensing probes. The RI sensitivity of the presented sensor is 6827.41 nm/RIU, 1.98 times superior to that of the pure Au film U-shaped optical SPR sensor. The sensor is insensitive to temperature fluctuations and has good repetitive and environmental stability. The proposed sensor has good potential for future applications in biomass detection, which also indicates that Bi2O2Se has good prospects for future applications in optoelectronic devices.
A coupling enhanced surface plasmon resonance (SPR) sensor based on coreless fiber is proposed. Compared with the common fiber, the coreless fiber is easier to perceive the changes of the external medium environment. As one-dimensional material with superior performance, the Au nano biconical particles are used to improve the sensor performance. Based on the finite element method (FEM), the electric field enhancement effect of the coupling between the SPR of the gold film and the Localized surface plasmon resonance (LSPR) of the Au nano biconical particles on the surface of the coreless fiber is analyzed, and the experimental results show that the Au nano biconical particles can improve the sensitivity. The sensitivity of the improved Au nano biconical particle sensor is 3514 nm/RIU, which is 64% higher than that of the traditional gold film SPR sensor, and the quality factor is increased by 24%. The new sensor based on Au nano biconical particles and gold film has a good application prospect in biosensor and chemical measurement.
7 February 2022 in IEEE Transactions on Nanobioscience
Long-range surface plasmon resonance (LRSPR) sensors have been extensively studied by virtue of their extremely narrow full width at half maxima (FWHM) characteristics, but their low sensitivity remains an important factor limiting the figure of merit (FOM), making the sensors have difficulties in detecting small refractive index changes accurately. To address this problem, this paper proposes and demonstrates a low dimensional nanostructure (Au nanospheres, WS2) assisted LRSPR sensor to achieve an effective enhancement of the sensor interfaced electric field and thus improve the sensitivity. The performance parameters of the two sensors are compared with the LRSPR sensor by finite element method analysis, and the results showed that the assistance of the low dimensional nanostructure has a positive effect on the sensor. The first refractive index sensing experiment of the WS2-assisted LRSPR sensor was realized with a 25.47% increase in sensitivity and a 7.13% increase in FOM simultaneously, and the Au nanospheres-assisted LRSPR sensor with a 29.23% increase in sensitivity and a 15.95% increase in FOM simultaneously. The introduction of low dimensional nanostructures provides a flexible and effective means of sensitization for LRSPR sensors, making the plasmon resonance sensors combine high sensitivity, narrow FWHM and high FOM, which have promising applications in biochemical sensing.
21 July 2022 in IEEE Transactions on Instrumentation and Measurement
To address the problems that the surface plasmon resonance (SPR) sensor is not sensitive enough to detect biomolecules in the refractive index range (RI $=1.33$ –1.34) and the traditional methods to enhance the sensitivity cause the sensor poor bioaffinity, this article proposed a raspberry-like silica-assisted high figure of merit (FOM) fiber-optic SPR sensor. The finite element method results show that when the raspberry-like silica is introduced to the SPR sensor, the resonant electric field intensity on the sensor surface is 2.97 times stronger than that of SPR sensors only. Raspberry-like silica particles composed of different noble metal nanoparticles (AuNPs, PtNPs, and CuNPs) were prepared to compare and analyze the effects of different nanoparticles on the sensing performance. The sensing experiments showed that AuNPs raspberry-like silica had the most excellent performance, enabling the sensor to achieve high sensitivity of 5264.3 nm/RIU, which is 2.65 times higher than the Au film SPR sensor. The fitting calculations showed that the AuNPs raspberry-like silica-assisted SPR sensor had a high FOM of 42.9 RIU $^{-1}$ , 1.9 times more than the Au film SPR sensor. In addition, the sensor has good temperature stability, repeatability, and generality after the corresponding test. The proposed raspberry-like structure provides a new approach to obtain both high sensitivity and high FOM for the SPR sensor, which makes the sensor potential for biosensing.