The image quality of very high-resolution satellite telescopes (VHRSTs) is affected by several factors, including optics, detector, pointing accuracy errors, attitude stability errors, and altitude variations. The charge-coupled devices (CCDs) with a time delay and integration (TDI) feature play a significant role along with the satellite attitude parameters in characterizing the VHRST image quality. The imperfection of the satellite control system to maintain the required pointing accuracy and attitude stability can lead to severe degradation in the quality of the acquired imagery. Hence, it is required to investigate their impacts carefully during the satellite preliminary design phase. In this paper, the combined effect of the TDI steps, satellite attitude parameters, and orbital altitude variations on the image quality are investigated in detail. The results show that the image quality in the along-and cross-track directions are affected seriously in certain situations by the roll and pitch angular velocity bias. Furthermore, the proposed mathematical model in this paper reveals that total modulation transfer function (MTF), as an image quality metric, is affected severely by the satellite altitude variation, particularly when employing a high number of TDI steps. For example, for a given scenario, when employing TDI steps of 64, the mathematical results show that the effect of a satellite altitude variation of 10 Km will result in a 65% reduction in total system MTF.
11 June 2021 in IEEE Transactions on Aerospace and Electronic Systems
In this paper, range images edge-based segmentation is investigated. The edgedetection in the range images is based on calculating significant change in the angle betweensurfaces normal by computing the surface normal in 3D for each point in the image. Threemethods for computing surface normal based on different Surface Fitting are considered. Firstone is the Eigenvector Method (EM), and second is the Weighted Least Squares Method(WLSM) which is achieved by combining both Eigenvector and least square methods (LSM),finally the Least Median of Squares method (LMS). These segmentation methods have beenapplied on 3 test range images of polyhedral objects [1], using Matlab under Linux operatingsystem. Following the process of segmentation, a performance evaluation of the appliedsegmentation methods is done. Experimental results show that significant performanceimprovement of range image segmentation by LMS method can be achieved.
Remote sensing change detection (RSCD) has advanced through convolutional, attention-based, transformer, and hybrid architectures, yet models are commonly compared as whole architectural families rather than by how their temporal streams interact. This study introduces the Temporal Interaction Taxonomy (TIT), which characterizes temporal feature interaction by timing, direction, and operator. Nine representative models, ranging from early-fusion convolutional baselines to hybrid CNN–Transformer designs, were evaluated using faithful Open-CD implementations under a unified protocol on the LEVIR-CD and WHU-CD building change datasets. TIT provided a consistent basis for describing bi-temporal integration across architectures. Cross-dataset performance was model- and direction-dependent: ChangeFormer achieved the highest mIoU in both transfer directions, reaching 59.99% for WHU→LEVIR and 82.58% for LEVIR→WHU. The results suggest an association between interaction design and cross-dataset robustness, but the independent contribution of temporal interaction cannot be separated from other architectural differences. Transfer also showed model-dependent directional asymmetry; its causes could not be isolated because dataset characteristics and model design were not independently controlled. Overall, temporal interaction provides a useful dimension for interpreting model behavior across the two evaluated datasets. These findings are limited to building change detection on LEVIR-CD and WHU-CD and require task-specific validation before extension to other RSCD applications.
1 May 2011 in International Conference on Aerospace Sciences and Aviation Technology
Image change detection is an important application of remote sensing technology.It is a process ascertaining the changes of specific features within a certain time interval. Thispaper presents an object-oriented image change detection methodology to detect the changesand analyze aerial remote sensing data of Sanaa sub-area. Furthermore, the urban growth(sprawl) in the study area is monitored and analyzed. A rule-based classification technique isapplied by using fuzzy functions, aiming to extract information of the urban spatial structure.Finally the classification accuracy of the used images was assessed with parameters of overallaccuracy, and kappa statistic.