The present research project focuses on the development of a Savonius type wind turbine, where a literature review is initially carried out to recognize the appropriate parameters for its design such as turbulence, wind velocity, and air density, followed by a design methodology to achieve the dimensioning by means of resistance calculation and selection of component materials, after having the final concept defined. Using computational tools such as Solidworks, Inventor, Simulation Mechanical, the design stage was validated through simulation to study the dynamic fluid behavior and the components were modeled to evaluate their response to wind loads, verifying their resistance. Subsequently, according to the modeling, the detailed drawings of the components of the turbine were obtained, with which they were assembled. Finally, having the physical model of the Savonius wind turbine, experimental tests were carried out in the laboratory of Fluids and Hydraulic Machines of the Technological University of Pereira.

The measurement of instantaneous angular speed in flywheels has been used in Internal Combustion Engines for the diagnosis of faults in the fuel injection systems, combustion quality at idle, ignition system, and especially in the performance assessment of starter motor and battery accumulator,...

Objective: the objective of this study is to conceptualize a network of heat exchangers designed to minimize energy waste and enhance the overall efficiency of the sugar production system.Methods: a systematic approach was adopted to analyze energy flows within the plant, identifying key areas for improvement, particularly in heating and evaporation processes. Heat accumulations in cascades and graphical analyses of composite curves were developed using specialized software to optimize heat exchange.Results: the results indicate a significant potential for energy savings, reducing the consumption of cooling and heating utilities in the plant by 7% and 30%, respectively. The developed computational tool allows for energy integration from simple processes to those with hundreds of streams. The pinch technology concept estimated an annual total savings of $464,850.08 in the selected process.Conclusion: this study demonstrates that thermal integration through pinch analysis not only improves energy efficiency in the sugar industry but also contributes to a considerable reduction in operational costs and environmental impact, providing a valuable tool for the industry’s sustainability and competitiveness.

Reliable electricity supply in Colombia’s Non-Interconnected Zones requires sustainable and low-cost energy technologies. Vertical-axis hydrokinetic turbines are promising for this purpose; however, their relatively low power coefficient remains a major challenge. This study combines transient 2D and 3D $k$–$\omega$ SST computational fluid dynamics (CFD) simulations with hydraulic channel experiments to investigate a hybrid Darrieus–Savonius turbine. A 27-case Design of Experiments (DoE) based on 2D CFD was first applied to screen the effects of rotor radius ratio (RR), attachment angle (AA), and water velocity. Within the investigated design space, the configuration with $\mathrm{R}\mathrm{R}=0.5$ and $\mathrm{A}\mathrm{A}=0^{\circ }$ produced the most favorable average performance. The selected configuration was subsequently analyzed using 3D CFD and experimentally evaluated at TSR values of 1.0, 1.1, and 1.2. At TSR = 1.0, the 3D model predicted ${\mathrm{C}}_{\mathrm{P}}=0.1525$, closely matching the experimental value of 0.1541 with a relative error of 1.05%. The results demonstrate that 2D CFD is useful for computationally efficient parameter screening and qualitative trend identification, but it overpredicts absolute performance because it neglects blade tip vortices, spanwise flow, and volumetric wake interactions. Three-dimensional CFD is therefore required for reliable performance prediction and analysis of the complex flow structures governing hybrid hydrokinetic turbine behavior.