Energy poverty vulnerability constitutes a significant concern in Portugal, with 17.5% of the population being unable to keep their home adequately warm. Furthermore, there is evidence that a substantial number of children live in unhealthy homes. This study aims to comprehensively characterise a sample of 101 Portuguese families with children and their homes in order to identify opportunities for actions for promoting long-lasting energy efficiency and environment health-promoting behavioural changes. To accomplish this aim, two tools—a building survey checklist and a questionnaire to participants—were developed and implemented to collect harmonised data on building-specific characteristics and on participants’ socioeconomic status and behaviour. The home visits for recruitment and data collection were conducted from July 2021 to April 2022. The results suggest that, for the population under study, the main opportunities for improvement include: (i) replacing low energy-efficient technologies, with high emission rates, namely those used for heating purposes, with cleaner and more efficient alternatives; (ii) providing citizens with detailed information about their home’s energy use and indoor air quality and (iii) educating the population on the best-practices for reducing indoor air stuffiness, mitigating the risk of hazardous exposures, improving thermal comfort and saving energy.
The demand for lower-impact materials in mobility has increased interest in the lightweight composite structures for electric vehicles (EVs). This study presents an extended and revised dataset for biaxial non-crimp fabric (NCF) composite laminates intended for two-wheeled EV chassis applications, building on earlier published results by repeating all mechanical tests and recalculations and by adding a full stress–strain analysis, a repeatability assessment across multiple specimens, and a digital image correlation (DIC)-based strain evaluation. Three material families, represented by four laminate conditions, were investigated: carbon/epoxy composites post-cured for 4 h and 10 h, glass-fiber composites, and linen (flax) composites. The tensile and flexural behaviors were characterized according to ISO 527-4 and ISO 14125, respectively, while a GOM ARAMIS optical system was used to obtain the axial strain, transverse strain, and Poisson’s ratio. Carbon laminates showed the highest performance, with the 10 h post-cure condition reaching 1126 MPa tensile strength, up to 60 GPa Young’s modulus, 696 MPa flexural strength, and 43 GPa flexural modulus. Glass laminates provided intermediate properties, whereas flax laminates showed lower strength but higher compliance and deformation capacity. The obtained results show that the biaxial NCF composites studied in this work offer weight-saving potential for micro-mobility chassis and provide a standard-based benchmark for future durability and life-cycle studies.