The results of experimental investigation of the icing processes of NACA 0015 airfoil are presented. The experiments have been carried out with the help of a high-speed camera at the icing/deicing facility at the Institute of Adaptronic and Functional Integration of the Technical University of Braunschweig. The investigation objective is the study of interaction between supercooled large droplets and the icing airfoil surface as well as physical phenomena occurring during the icing process. Evolution of the initial phase of ice growth process over time is observed, the general structure of ice accretion and its alteration along the airfoil is examined. Experiments have been carried out within a wide temperature range. Photos of the specific moments of the icing process have been analyzed. Splashing events and water movement on the icing surface have been observed. On the basis of the conducted researches, new laws of icing processes and roughness development at micro-level have been established.
The main models and methods for investigating the process of icing of aerodynamic surfaces, the meteorological parameters of the icing, the cloud types, the types of the ice coating, and the systems of protection against icing are analyzed. A software is developed which makes it possible to model the icing on the leading edge of the wing airfoil. The motion of the carrying medium is described on the basis of the Navier-Stokes equations for a compressible gas, together with the Spalart-Allmaras turbulence model. A delayed model is applied to describe the motion of supercooled water droplets. The numerical modeling of the ice accretion process is based on the control volume method which consists in the solution of the differential equations of the mass, momentum, and energy conservation for any surface element using a model which allows for the surface moisture behavior on macro- and microlevels. With reference to the example of the NACA 0012 airfoil in two-dimensional viscous compressible two-phase flow the main shapes of the ice bodies are reproduced with account for the ice accretion regime, the form of the moisture existence on the airfoil, the surface heating, and the effect of the variation in the airfoil geometry on the external flow and the aerodynamic characteristics.
General models and methods for examining the icing processes of airfoils, as well as the corresponding meteorological parameters, types of clouds, and ice, are analyzed. Techniques for estimating ice growth in typical flight conditions are considered. The model of interpenetrating media and the trajectory model (inertial model of droplets precipitation) are used to describe moisture precipitation on the streamlined surface. The results of calculating the icing of a cylinder and an airfoil in viscous compressible air-droplet flow, taking into account the form of existence of moisture on the airfoil and the mode of ice accretion, are presented.
1 March 2019 in Journal of Engineering Physics and Thermophysics
We have developed a software package and related methodology that can be used to simulate the process of airfoil icing during flight in the presence of large supercooled liquid water drops in the oncoming airflow. The motion of a carrier medium is described using the Navier-Stokes equations for a compressible gas. The motion of water drops is described using an inertial model. The process of water deposition and its subsequent freezing on an airfoil surface are described by the method of control volumes based on the equations of conservation of mass, momentum, and energy for each element of the surface. The main results of simulations are presented for the icing of an NACA 0012 airfoil profile with “barrier” ice formation in the absence and presence of heating of the leading edge. The influence of the ice-growth thickness and position on the airfoil chord on the pattern of airflow and aerodynamic characteristics of airfoil is analyzed.
31 January 2025 in EUREKA: Physics and Engineering
WIG-craft are high-speed vehicles that use the dynamic principle of support above the ground. Today, the current examples and projects of such vessels concern, mainly, only large-sized or medium-sized manned vehicles, for which it is possible to ensure stable aerodynamic characteristics during flight. At the same time, modern trends in the development of vehicles indicate a growing interest in small unmanned vehicles. Currently, the issue of creating small manned and unmanned WIG-crafts has become relevant. In the presented work, based on the von Karman–Gabrielli methodology, the efficiency of transport WIG-craft among other types of vehicles was evaluated. The possibility of using such small-sized devices as unmanned devices is considered. The productivity of a WIG-craft is depends on its aerodynamic characteristics. Scale factor is very important for WIG-craft, because the aerodynamics is depended on wings size. The design of a small-sized WIG-craft based on the aerodynamic scheme of an airplane is proposed. The aerodynamic characteristics of the proposed device were evaluated using CFD modeling. Outcomes indicates that the aerodynamic properties of a ship are greatly affected by clearance and velocity. Ground effect is allowed to increase the aerodynamic quality up to 1.5 times, provide the transport of payloads at velocities as high as 250 km/h with a take-off weight of 2.7 tons. The analysis of computation results shows that the proposed project of an unmanned WIG-craft is fully operational and promising for solving the problems of high-speed delivery of small payloads. According to the computation results of the aerodynamic characteristics, the specific power of the device was determined, which indicates the high theoretical efficiency of the proposed means.