Stability is the most crucial issue in the fabrication of oxide thin-film transistors (TFTs) for next-generation displays. We have investigated the thermal distribution of an InSnZnO TFT under various gate and drain voltages by using an infrared imaging system. An asymmetrical thermal distribution was observed at a local drain region in a TFT depending on bias stress. These phenomena were decelerated or accelerated with stress time. We discussed the degradation mechanism by analyzing the electrical properties and thermal distribution. We concluded that the degradation phenomena are caused by a combination of Joule heating and the hot carrier effect.
5 November 2014 in The Journal of Physical Chemistry C
The position of the conductive filament (CF) and the heating behaviour during a switching process in nonpolar and bipolar resistive random access memories (ReRAMs) were evaluated using thermal analysis. The position of the CF was clearly observed from Joule heating at the surface of the electrode on the CF. The position of the CF did not change during the switching cycle, except in the case of an unstable CF. In the nonpolar ReRAM, spike-shaped temperature increments were observed during both the forming and the set processes because of the overshoot current. However, the behaviour of the temperature increment in the bipolar ReRAM was virtually consistent with the profile of the electrical power.
24 August 2016 in The Journal of Physical Chemistry C
An Al2O3/TiO2 double layer anti‐reflection coating (ARC) film formed by spray pyrolysis was introduced for monocrystalline silicon solar cells as the nonvacuum processing method. The thickness of the Al2O3 layer and TiO2 compact layer was controlled by the volume of deposited precursor solution and confirmed by ellipsometry and scanning electron microscopy. The average photovoltaic properties of photocurrent density (Jsc), open‐circuit photovoltage (Voc), fill factor (FF), and photo energy conversion efficiency (η) were 37.0 mA/cm2, 590 mV, 0.712, and 15.5%, respectively. A significant improvement on Jsc and η could be confirmed owing to the Al2O3/TiO2 ARC. The results of Fourier transform infrared (FTIR) spectroscopy and optical simulation with modeling for the reflectance properties confirmed that C‐H‐based organics remained after the deposition of thin films.