We report on realization of channel plasmon-polariton (CPP) propagation along a subwavelength metal groove. Using imaging with a near-field microscope and end-fire coupling with a tapered fiber connected to a tunable laser at telecommunication wavelengths (1425–1620 nm), we demonstrate low-loss (propagation length $\sim 100\mu \mathrm{m}$) and well-confined (mode width $\cong 1.1\mu \mathrm{m}$) CPP guiding along a triangular $0.6\mu \mathrm{m}$-wide and $1\mu \mathrm{m}$-deep groove in gold. We develop a simple model based on the effective-index method that accounts for the main features of CPP guiding and provides a clear physical picture of this phenomenon.

We report a comprehensive experimental study of optical and electrical properties of thin polycrystalline gold films in a wide range of film thicknesses (from 20 to 200 nm). Our experimental results are supported by theoretical calculations based on the measured morphology of the fabricated gold films. We demonstrate that the dielectric function of the metal is determined by its structural morphology. Although the fabrication process can be absolutely the same for different films, the dielectric function can strongly depend on the film thickness. Our studies show that the imaginary part of the dielectric function of gold, which is responsible for optical losses, rapidly increases as the film thickness decreases for thicknesses below 80 nm. At the same time, we do not observe a noticeable dependence of optical constants on the film thickness for thicker samples. These findings establish design rules for thin-film plasmonic and nanophotonic devices.

Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy has been recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS₃ and h-BN crystals. This issue inspired an intensive search for giant optical anisotropy among natural and artificial materials. Here, we demonstrate that layered transition metal dichalcogenides (TMDCs) provide an answer to this quest owing to their fundamental differences between intralayer strong covalent bonding and weak interlayer van der Waals interaction. To do this, we made correlative far- and near-field characterizations validated by first-principle calculations that reveal a huge birefringence of 1.5 in the infrared and 3 in the visible light for MoS₂. Our findings demonstrate that this remarkable anisotropy allows for tackling the diffraction limit enabling an avenue for on-chip next-generation photonics.

We report on subwavelength plasmon-polariton guiding by triangular metal wedges at telecom wavelengths. A high-quality fabrication procedure for making gold wedge waveguides, which is also mass-production compatible offering large-scale parallel fabrication of plasmonic components, is developed. Using scanning near-field optical imaging at the wavelengths in the range of 1.43–1.52 µm, we demonstrate low-loss (propagation length ~120 µm) and well-confined (mode width ≅1.3 µm) wedge plasmon-polariton guiding along triangular 6-µm-high and 70.5°-angle gold wedges. Experimental observations are consistent with numerical simulations performed with the multiple multipole and finite difference time domain methods.

We report preliminary results on the development of compact (length < 100 µm) fiber-coupled dielectric-loaded plasmonic waveguide components, including Mach-Zehnder interferometers (MZIs), waveguide-ring resonators (WRRs) and directional couplers (DCs), whose operation at telecom wavelengths is controlled via the thermo-optic effect by electrically heating the gold stripes of dielectric-loaded plasmonic waveguides. Strong output modulation (> 20%) is demonstrated with MZI- and WRR-based components, and efficient (~30%) rerouting is achieved with DC switches.