Jean-Lou Pierson

Jean-Lou Pierson

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 July 2020 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
JPJean-Lou Pierson
Jean-Lou Pierson
JMJacques Magnaudet
Jacques Magnaudet
Edson José SoaresEdson José Soares
Edson José Soares
SPStéphane Popinet
Stéphane Popinet
We numerically study the retraction of an axisymmetric viscous filament in a passive surrounding fluid. The analysis focuses on the evolution of the tip velocity, from the early stage of the filament retraction until it reaches its final equilibrium spherical shape. The problem is governed by two control parameters: the Ohnesorge number, Oh, which measures the relative importance of viscous and surface tension effects, and the initial aspect ratio of the filament, A. We investigate the influence of Oh over a wide range of aspect ratios. The small-Oh regime is characterized by the occurrence of a spherical blob at the extremity of the filament. This feature has a key impact on the tip dynamics, which moves with an oscillating velocity whose mean value is close to the Taylor-Culick prediction. The oscillatory behavior of the tip velocity is explained through a simple mass-spring model. This regime is also characterized by the presence of capillary waves, with a phase velocity slightly larger than the Taylor-Culick velocity. Surface oscillations are also observed when the filament reaches its final spherical shape; the corresponding period agrees well with predictions of the linear theory. At intermediate Oh and large A, the tip velocity reaches a value close to the Taylor-Culick prediction. However, for smaller aspect ratios, the maximum tip velocity is much smaller than this prediction, and does not exhibit any oscillation. The recoil dynamics is qualitatively and quantitatively different at high Oh. In this case, the radius of the filament grows uniformly over time and no blob forms, making the tip velocity decrease after a short transient. A self-similar solution is found to closely match the numerical results in this regime.

22 April 2021 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
MKMohammed Kharrouba
Mohammed Kharrouba
JPJean-Lou Pierson
Jean-Lou Pierson
JMJacques Magnaudet
Jacques Magnaudet
The flow past a fixed finite-length circular cylinder, the axis of which makes a nonzero angle with the incoming stream, is studied through fully resolved simulations, from creeping-flow conditions to strongly inertial regimes. The investigation focuses on the way the body aspect ratio χ (defined as as the length-to-diameter ratio), the inclination angle θ with respect to the incoming flow, and the Reynolds number Re (based on the cylinder diameter) affect the flow structure past the body and therefore the hydrodynamic loads acting on it. The configuration θ=0∘ (where the cylinder is aligned with the flow) is first considered from creeping-flow conditions up to Re=400, with aspect ratios up to 20 (10) for Re≤10 (Re≥10). In the low-to-moderate Reynolds-number regime (Re≲5), influence or the aspect ratio, inclination (from 0∘ to 30∘), and inertial effects are examined by comparing numerical results for the axial and transverse force components and the spanwise torque with theoretical predictions based on the slender-body approximation, possibly incorporating finite-Reynolds-number corrections. Semiempirical models based on these predictions and incorporating finite-length and inertial corrections extracted from the numerical data are derived. For large enough Reynolds numbers (Re≳102), separation takes place along the upstream part of the lateral surface of the cylinder, deeply influencing the surface stress distribution. Numerical results are used to build empirical models for the force components and the torque, valid for moderately inclined cylinders (|θ|≲30∘) of arbitrary aspect ratio up to Re≈300 and matching those obtained at low-to-moderate Reynolds number.

3 April 2019 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
JPJean-Lou Pierson
Jean-Lou Pierson
FAFranck Auguste
Franck Auguste
AHAbdelkader Hammouti
Abdelkader Hammouti
AWAnthony Wachs
Anthony Wachs
We study the flow past a finite-length yawed three-dimensional cylinder by a finite-volume–fictitious-domain method. We validate our non-boundary-fitted method against boundary-fitted numerical results for a finite-length cylinder whose axis is parallel to the streamwise direction. Drag and lift forces exerted on the cylinder and vortex shedding onset and frequency are carefully analyzed. Satisfactory agreement with published results gives strong confidence in the numerical methodology provided the boundary layer is accurately resolved. Then we carry out a detailed study of the flow past a yawed cylinder of aspect ratio L/D=3 (where L is the cylinder length and D is the cylinder diameter) at moderate Reynolds numbers (25≤Re≤250). We show that the wake patterns and the associated transitions depend strongly on Re and the yaw angle θ with respect to the streamwise direction. Various regimes are encountered including a standing-eddy pattern, steady shedding of one or two pairs of counterrotating vortices, periodic shedding of counterrotating vortices and unsteady shedding of hairpin-shaped vortices. The steady shedding of one or two pairs of counterrotating vortices prevails in the range of parameters studied. Hydrodynamic forces exerted on the cylinder are well approximated by laws derived in the Stokes flow regime, even for moderate Reynolds numbers. For the highest Reynolds numbers (Re=150,200,250) we show that the forces slowly depart from the Stokes-based laws. Simple modification of these laws is proposed, yielding a satisfactory match with the numerical results. An accurate way to compute the torque is also proposed based on the normal force to the cylinder.

18 September 2020 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
HDHiranya Deka
Hiranya Deka
JPJean-Lou Pierson
Jean-Lou Pierson
We study the retraction of a viscous liquid sheet of finite length with negligible effect of the ambient medium. Using the long-wavelength model we derive the scaling laws and similarity solution for the interface profile of the retracting sheet. Far from the tip, the similarity solution for the interface profiles converges to an asymptotic value of 1/4. Direct numerical simulations are performed to compare the theoretical results with the simulations. When the inertia is negligible, the interface profiles remain flat during the retraction process which is in agreement with the self-similar solution. Using this similarity solution we derive the expression for the temporal variation of the tip speed for finite liquid sheets. We demonstrate that unlike an infinite sheet where the sheet retracts with a steady speed (known as Taylor-Culick speed), the tip speed decreases as a function of time for a finite liquid sheet. This is true when the viscous effects are larger than or of the same order with the inertia effects. Otherwise, the sheet retracts with the formation of a bulbous tip whose speed reaches a value closer to the Taylor-Culick speed.

8 September 2021 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
JPJean-Lou Pierson
Jean-Lou Pierson
MKMohammed Kharrouba
Mohammed Kharrouba
JMJacques Magnaudet
Jacques Magnaudet
Using fully-resolved simulations, we examine the torque experienced by a finite-length circular cylinder rotating steadily perpendicularly to its symmetry axis. The aspect ratio χ, i.e., the ratio of the length of the cylinder to its diameter, is varied from 1 to 15. In the creeping-flow regime, we employ the slender-body theory to derive the expression of the torque up to order 4 with respect to the small parameter 1/ln(2χ). Numerical results agree well with the corresponding predictions for χ≳3. We introduce an ad hoc modification in the theoretical prediction to fit the numerical results obtained with shorter cylinders, and a second modification to account for the increase of the torque resulting from finite inertial effects. In strongly inertial regimes, a prominent wake pattern made of two pairs of counter-rotating vortices takes place. Nevertheless the flow remains stationary and exhibits two distinct symmetries, one of which implies that the contributions to the torque arising from the two cylinder ends are identical. We build separate empirical formulas for the contributions of pressure and viscous stress to the torque provided by the lateral surface and the cylinder ends. We show that, in each contribution, the dominant scaling law may be inferred from simple physical arguments. This approach eventually results in an empirical formula for the rotation-induced torque valid throughout the range of inertial regimes and aspect ratios considered in the simulations.

5 April 2023 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
NFNicolas Fintzi
Nicolas Fintzi
LGLionel Gamet
Lionel Gamet
JPJean-Lou Pierson
Jean-Lou Pierson
Direct numerical simulations are performed to evaluate the hydrodynamic forces and torque on finite-length cylinders embedded in a uniform flow for a wide range of aspect ratios (2≤χ≤30). Both viscous-dominated and moderately inertial regimes are investigated. We start the investigation by comparing the numerical results to the predictions of the Khayat and Cox [ J. Fluid Mech. 209, 435 (1989)] slender-body theory. We show that this theory can predict with reasonable accuracy the drag force on the cylinder for a large range of aspect ratios. However, the theory is unable to predict accurately the lift force and torque for moderately long cylinders of χ<30. By performing a careful analysis of the local contributions to the loads, we show that the disagreement with the theory is mainly explained by the contribution of the cylinder ends which are not properly taken into account by the theory. Semiempirical models based on theoretical results for small but finite inertia are then built to provide a better match with the numerical predictions. We show as in the slender-body theory that the relevant Reynolds number is based on the particle length. We also derive a ready-to-use tensorial formulation for the forces and inertial torque. Additionally, we compare the whole model to experimental results of settling cylinder showing better agreement than the slender-body theory.