Aero-propulsive interactions in flapped configurations are a critical consideration for Short Take-Off and Landing (stol) aircraft, where extreme operational requirements demand robust, optimization-ready methodologies during preliminary design. This study develops a surrogate modeling framework that predicts the section-level aerodynamic response of a propeller–airfoil–flap configuration across a multi-dimensional space of propeller positioning, flap geometry, and operational conditions. A paired powered and unpowered design of experiments isolates the propulsive contribution to lift, drag, and pitching moment, while a virtual-disk propeller model parameterized by volumetric thrust decouples the prediction from any specific blade design. The framework couples two-dimensional steady Reynolds-averaged Navier–Stokes (rans) dataset generation with a Deep Neural Network (dnn) surrogate, which achieves coefficient of determination values above 0.96 for all three coefficients and reduces evaluation cost by several orders of magnitude relative to direct cfd, a benefit that is decisive in optimization. Single- and multi-objective optimization identify Pareto-optimal configurations, and independent cfd verification confirms prediction accuracies within 5 to 10% across the operational envelope. The resulting surrogate enables rapid, optimization-ready exploration of propeller–airfoil–flap configurations, providing actionable trade-off information for the preliminary design of stol aircraft.
An aircraft and its engines form a tightly coupled system, yet conceptual design still treats the engine as a fixed or merely rescaled performance deck. This work presents a reduced-order rubber engine methodology for the combined conceptual design of aircraft and engine. Semi-empirical sizing laws are embedded in a zero-dimensional cycle model, so that spool speeds, efficiencies and cooling flows are derived rather than prescribed, and each of seven turboprop and turbofan architectures with one to three spools is reduced to a handful of design variables. Higher-fidelity engine performance models were constructed from publicly available data of existing engines. The reduced-order models were subsequently benchmarked against these reference models to evaluate their accuracy and predictive capability. For each engine family, a feasibility classifier and a performance regressor spanning all its architectures are trained on thousands of converged cycle designs and drive a runtime multi-objective engine optimization embedded in the aircraft sizing loop. A single pair of networks covers an entire family with held-out errors below one percent, so that the engine architecture becomes a decision variable of the search rather than a modeling choice fixed beforehand. The methodology is applied to a turboprop-powered tactical transport type of aircraft over a design space of wing area, aspect ratio and vertical-tail volume, every configuration of which converges to a matched airframe and engine. The approach makes the joint conceptual design of engine and aircraft tractable, and prices each top-level requirement at conceptual cost.
Aero-propulsive interactions in flapped configurations during preliminary design phases are a critical consideration for Short Take-Off and Landing (STOL) aircraft, where extreme operational requirements demand robust, optimization-ready methodologies. This research addresses a key gap in current design practices by providing rapid, high-fidelity predictions of complex propeller–airfoil–flap interactions, while capturing the nonlinear correlations among governing parameters. The methodology combines systematic computational fluid dynamics (CFD)-based dataset generation with Deep Neural Network (DNN) surrogate modeling, enabling robust predictive capabilities across an eight-dimensional design space encompassing propeller positioning, flap geometry, and operational conditions. The trained neural network achieves coefficient of determination values exceeding 0.96 for all aerodynamic coefficients, while drastically reducing computational cost relative to direct CFD evaluation—a benefit that proves particularly valuable in optimization studies. Multi-objective analyses identify Pareto-optimal configurations, and independent CFD validation confirms prediction accuracies within 5–10\% across the operational envelope. These results provide unprecedented capability for systematic aero-propulsive optimization, offering actionable insights for preliminary design of tactical STOL aircraft.