Vibration-based structural health monitoring (SHM) for long-span bridges has become a dominant research topic in recent years. The Nam O Railway Bridge is a large-scale steel truss bridge located on the unique main rail track from the north to the south of Vietnam. An extensive vibration measurement campaign and model updating are extremely necessary to build a reliable model for health condition assessment and operational safety management of the bridge. The experimental measurements are carried out under ambient vibrations using piezoelectric sensors, and a finite element (FE) model is created in MATLAB to represent the physical behavior of the structure. By model updating, the discrepancies between the experimental and the numerical results are minimized. For the success of the model updating, the efficiency of the optimization algorithm is essential. Particle swarm optimization (PSO) algorithm and genetic algorithm (GA) are employed to update the unknown model parameters. The result shows that PSO not only provides a better accuracy between the numerical model and measurements, but also reduces the computational cost compared to GA. This study focuses on the stiffness conditions of typical joints of truss structures. According to the results, the assumption of semi-rigid joints (using rotational springs) can most accurately represent the dynamic characteristics of the truss bridge considered.
1 October 2021 in IEEE Transactions on Automation Science and Engineering
Smart structural health monitoring (SHM) for large-scale infrastructure is an intriguing subject for engineering communities thanks to its significant advantages such as timely damage detection, optimal maintenance strategy, and reduced resource requirement. Yet, it is a challenging topic as it requires handling a large amount of collected sensors data continuously, which is inevitably contaminated by random noises. Therefore, this study developed a practical end-to-end framework that makes use of physical features embedded in raw data and an elaborated hybrid deep learning model, namely 1-DCNN-LSTM, featuring two algorithms--convolutional neural network (CNN) and long-short term memory (LSTM). In order to extract relevant features from sensory data, the method combines various signal processing techniques such as the autoregressive model, discrete wavelet transform, and empirical mode decomposition. The hybrid deep learning 1-DCNN-LSTM is designed based on the CNN's capacity of capturing local information and the LSTM network's prominent ability to learn long-term dependencies. Through three case studies involving both experimental and synthetic data sets, it is demonstrated that the proposed approach achieves highly accurate damage detection, as accurate as the powerful 2-D CNN, but with a lower time and memory complexity, making it suitable for real-time SHM.
The process of damage identification in Structural Health Monitoring (SHM) gives us a lot of practical information about the current status of the inspected structure. The target of the process is to detect damage status by processing data collected from sensors, followed by identifying the difference between the damaged and the undamaged states. Different machine learning techniques have been applied to attempt to extract features or knowledge from vibration data, however, they need to learn prior knowledge about the factors affecting the structure. In this paper, a novel method of structural damage detection is proposed using convolution neural network and recurrent neural network. A convolution neural network is used to extract deep features while recurrent neural network is trained to learn the long-term historical dependency in time series data. This method with combining two types of features increases discrimination ability when compares with it to deep features only. Finally, the neural network is applied to categorize the time series into two states - undamaged and damaged. The accuracy of the proposed method was tested on a benchmark dataset of Z24-bridge (Switzerland). The result shows that the hybrid method provides a high level of accuracy in damage identification of the tested structure.
8 July 2024 in Construction and Building Materials
In this paper, we propose an effective approach for identifying damages in the Z24 bridge, a large-scale bridge in Switzerland. The dataset of the Z24 bridge is evaluated as a benchmark, reflecting the behavior of a real structure that has been used for numerous studies. However, most of the previous studies have only addressed the issues of updating the model or estimating the location and severity of damages. The core idea behind our proposed approach is to leverage the strengths of two effective Machine Learning (ML) algorithms: K-Nearest Neighbor (KNN) and Artificial Neural Network (ANN), to assess both the location and severity of damages in the Z24 bridge. First, we employ KNN, an unsupervised learning algorithm, for pinpointing the damage location. This strategy proves highly efficient, significantly reducing computation time by circumventing the need for a loss function during KNN training. By adopting this approach, KNN effectively mitigates the risk of encountering local minima in the ANN optimization process. Subsequently, we deploy ANN to determine the damage severity. When compared to previous studies on the Z24 bridge, our proposed method (KNN-ANN) exhibits promising results. Furthermore, our results illustrate that KNN-ANN consistently outperforms traditional ANN methodologies.