Rapid detection of bursts and leaks in water distribution systems (WDSs) can reduce the social and economic costs incurred through direct loss of water into the ground, additional energy demand for water supply, and service interruptions. Many real-time burst detection models have been developed in accordance with the use of supervisory control and data acquisition (SCADA) systems and the establishment of district meter areas (DMAs). Nonetheless, no consideration has been given to how frequently a flow meter measures and transmits data for predicting breaks and leaks in pipes. This paper analyzes the effect of sampling interval when an adaptive Kalman filter is used for detecting bursts in a WDS. A new sampling algorithm is presented that adjusts the sampling interval depending on the normalized residuals of flow after filtering. The proposed algorithm is applied to a virtual sinusoidal flow curve and real DMA flow data obtained from Jeongeup city in South Korea. The simulation results prove that the self-adjusting algorithm for determining the sampling interval is efficient and maintains reasonable accuracy in burst detection. The proposed sampling method has a significant potential for water utilities to build and operate real-time DMA monitoring systems combined with smart customer metering systems.
Proper performance of water distribution networks (WDNs) plays a vital role in customer satisfaction. The aim of this study is to conduct a sensitivity analysis to evaluate the behavior of WDNs analyzed by a pressure-driven analysis (PDA) approach and the classification technique by using an appropriate artificial neural network, namely the Group Method of Data Handling (GMDH). For this purpose, this study is divided into four distinct steps. In the first and second steps, a real network has been analyzed by using a Pressure-Driven Analysis approach (PDA) to obtain the pressure, and α coefficient, the percentage of supplied flow. The analysis has been performed by using three different values of the design peak coefficient k*. In the third step, the Group Method of Data Handling (GMDH) has been applied and several binary models have been constructed. The analysis has been carried out by using input data, including the real topology of the network and the base demand necessary to satisfy requests of users in average conditions and by assuming that the demand in each single one-hour time step depends on a peak coefficient. Finally, the results obtained from the PDA hydraulic analysis and those obtained by using them in the GMDH algorithm have been compared and sensitivity analysis has been carried out. The innovation of the study is to demonstrate that the input parameters adopted in the design are correct. The analysis confirms that the GMDH algorithm gives proper results for this case study and the results are stable also when the value of each k*, characteristic of a different time hour step, varies in an admissible technical range. It was confirmed that the results obtained by using the PDA approach, analyzed by using a GMDH-type neural network, can provide higher performance sufficiency in the evaluation of WDNs.
In a deep learning model, the effect of the model may vary depending on the setting of the hyperparameters. Despite the importance of such hyperparameter determination, most previous studies related to burst detection models of the water supply pipe network used hyperparameters applied in other fields as-is or made a trial-and-error setting based on experience, which is a limitation. In this paper, a study was conducted on the deep learning hyperparameter determination of a deep neural network (DNN)-based real-time detection model of pipe burst accidents. The pipe burst model predicted water pressure by using operation data in units of 1 min, and the data period applied for the model training was less than 1 month (1, 2, and 3 weeks) in order to consider frequent changes in the system. A sensitivity analysis was first performed on the type of activation function and the period of the learning data, which may have different effects depending on the characteristics of the target problem. The number of hidden layers related to the network structure and the number of neurons in each hidden layer were set as hyperparameters for additional sensitivity analysis. The sensitivity analysis results were derived and compared using four quantified prediction error indicators. In addition, the model running time was analyzed to evaluate the practical applicability of the development model. From the results, it was confirmed that excellent effects could be expected if using a rectifier function as the activation function, 144 nodes in the hidden layer, which is eight times the number of nodes in the input layer, and four hidden layers. Additionally, by analyzing the appropriate period of training data required for model pressure prediction through prediction error and driving time, it was confirmed that it was most appropriate to use the data of two weeks. By applying the hyperparameter values determined through detailed sensitivity analysis and by applying the data of one week including actual burst accidents to the built-up pressure prediction model, the accident detection and predictive performance of the model were verified. The rational determination of the period of input factors for the optimal hyperparameter setting and model building, as in this study, is very necessary and very important as it can serve to ensure the continuity of the operation effects of the deep learning model.
The design of surge protection devices is a practical issue for the management of pressurized pipeline systems. Depending on the flow status, dimension, material, and fluid properties of a particular pipeline, the generation of hydraulic transients and their interactions with surge protection devices have been explored considering different conditions for various pipeline systems. The resonance between the pipeline elements and surge energy absorption function of the hydraulic structure should be adaptively considered for each pipeline system. To comprehensively address surge generation and surge alleviating process, this study introduced dimensionless equations of fluid motion and continuity, and their solutions were developed in the dimensionless frequency domain. The impact of the surge tank, pressure accumulator, and its connector were also developed in terms of dimensionless operators. The impact of distinct flow conditions and pipeline properties was successfully addressed by an integrated parameter, dimensionless resistance, which also provided a unified condition for water hammer similarity in reservoir pipeline surge tank pipeline valve (RPSPV) systems. The development of dimensionless hydraulic impedance expressions along a pipeline system and its conversion into a response function provides a normalized pressure response in the dimensionless time domain. Excellent agreement was found between transient simulations using the developed method and those obtained using existing methods. The integration of a dimensionless approach into a metaheuristic engine provides a general platform for surge tank (ST) design in the comprehensive bounds of flow and pipeline conditions.
Multi-regional waterworks are large-scale facilities for supplying tap water to the public and industrial parks, and interruptions in the water supply due to leaks result in massive social and economic damages. Accordingly, real-time, around-the-clock accident monitoring is necessary to minimize secondary damage. In the present study, a section of a large-scale waterworks transmission mains system with frequent changes in its physical boundaries was defined for sensor network map-based deep learning input and output. A deep neural network (DNN)-based pressure prediction model, able to detect pipe burst accidents in real-time using short-term data collected over periods within 1 month, was developed. A sensor network map refers to a sensor-based hierarchy diagram, which is expressed using a hydraulically divided area. A hydraulically independent area can be determined using known value information (e.g., the known flow, pressure, and total head) in a complex water supply system. The input data used for the deep learning model training were: the water levels measured at 1 min intervals, flow rates, ambient pressure, pump operation state, and electric valve opening data. To verify the developed methodology, two sets of real-world data from past burst accidents in different multi-regional waterworks systems were used. The results showed that the difference between the pressure as measured by pressure meters and an estimated pressure was extremely small before an accident, and that the difference would reach a maximum at the time point when an accident occurs. It was confirmed that an approximate estimation of an accident occurrence and accident location could be estimated based on predicted pressure meter data. The developed methodology predicts a mutual influence between pressure meters and, therefore, has the advantage of not requiring past data covering long time periods. The proposed methodology can be applied immediately and used in currently operational large-scale water transmission main systems.
8 September 2011 in International Journal for Numerical Methods in Fluids