We present a procedure to use ambient noise recordings to derive high-resolution 3D S-wave velocity models for sedimentary structures by joint inversion of phase velocity dispersion curves (DCs) and horizontal-to-vertical spectral ratios (HVSRs). This procedure is applied to seismological data from a network of 894 stations with a spacing of about 1 km located in the Xiong’an New Area (China), close to Beijing. To obtain the DCs, a Modified Correlation BeamForming method is used to process the noise at subarrays, which enables us to map directly the lateral variations of the phase velocity of the Rayleigh-wave fundamental mode, first overtone, as well as fundamental Love wave, in the total frequency range of 0.3–3 Hz. HVSRs are derived in the frequency range 0.1–10 Hz from the computation of the directional energy density of the three components at each station based on the diffuse field assumption. By combining the DCs obtained by the array-based method and the single-station HVSR curves in a joint inversion, a high-resolution 3D S-wave velocity model of the study area is established down to 2 km depth. The model brings useful information for seismic hazard assessment as well as geothermal energy exploration. It reveals that the thickness of the sediments is highly correlated with the distribution of geologic structures such as highs and lows.
27 March 2026 in Journal of Geophysical Research: Solid Earth
Conventional beamforming of multi‐component ambient seismic noise typically utilizes only the vertical‐vertical (ZZ) component to extract Rayleigh wave dispersion curves or the transverse‐transverse (TT) component for Love waves. In this study, we extend weighted and modified beamforming to cross‐correlation functions between different components. We demonstrate that the beamforming output for all components from an array with finite stations can be represented theoretically by a cosine‐modulated sinc function multiplied by an amplitude factor. This representation explains the energy distribution features across mode branches in multi‐mode dispersion spectrum obtained through array‐based techniques. The method is validated using both synthetic test and field data from arrays at different scales. We successfully extract multi‐mode dispersion curves for both Rayleigh and Love waves, as well as Rayleigh wave ellipticity with polarity information. By comparing with the results outputted by the analytical formulation, the features of the multi‐mode dispersion spectrum are investigated by considering the excitation intensity of each mode. We observe both prograde and retrograde particle motion in the fundamental mode Rayleigh wave from field data at a local basin scale. We also observe that the phase velocity estimated from ZZ and RZ (radial‐vertical) component has a systematic difference from those estimated from RR and ZR component for some mode branches, implying that this can be used to characterize the polarization anisotropy of the earth. The proposed method shows potential for extracting multi‐mode surface wave dispersion curves and Rayleigh wave ellipticity from ambient seismic noise, including leaking modes.
Distributed acoustic sensing (DAS) converts fiber cables into dense strain-rate sensor arrays, capturing direct, reflected and guided seismic phases with ultra-fine spatial sampling. However, DAS interrogators suffer far stronger random noise than traditional geophones, limiting its microseismic imaging capacity. This work adopts curvelet-transform denoising to suppress noise. Curvelets partition the frequency–wavenumber plane into multiscale directional sectors; coherent wave energy concentrates in limited angular wedges, while stochastic noise disperses evenly across all transform coefficients, enabling noise-signal separation via wedge-wise thresholding. We test four default threshold schemes on synthetic downhole DAS microseismic data. Parameter tuning proves all methods deliver comparable performance, so we compare their out-of-box reliability for shale reservoir monitoring. Three noise-statistic-based strategies perform stably: median-absolute-deviation (MAD), quiet-window and empirical-cumulative-distribution-Function (ECDF percentile) thresholding. By contrast, the default knee-point algorithm from mainstream DAS toolboxes fails, as its preset threshold falls within noise components and barely removes interference. We propose MAD as a robust default for the tested downhole DAS microseismic setting for it estimates thresholds directly from noisy traces without blank reference windows and offers superior operational stability. Applied to field DAS records from a southwest China shale-gas horizontal monitor well, the MAD curvelet workflow greatly enhances microseismic arrivals with negligible spurious events. Benchmarks against standard 2D Daubechies-4 wavelet and adaptive Goldstein FK filtering verify curvelet denoising as a physically interpretable, efficient tool for DAS wavefields.
The 3D S-wave velocity of shallow structure, especially the Quaternary sediments at 0-1 km near the surface, is an important issue of concern in urban planning and construction for the requirements of seismic hazard assessment and disaster mitigation. Due to the facility and less dependence on the site environment, noise-based technique is an ideal way to acquire the fine structure of urban sedimentary basin. Based on the dense array composed of more than 900 stations deployed in Tongzhou at a local scale of 20 × 40 km 2 , we proved the lateral variation of the phase velocity of multi-mode surface waves can be estimated directly with adequate accuracy by beamforming seismic noise with moving subarray, without tomography. Rayleigh wave phase velocity maps, at frequencies between 0.3 and 2.5 Hz for the fundamental mode as well as 0.8 and 3.0 Hz for the first overtone, are obtained. The 3D S-wave velocity model at 0-1 km depth with lateral resolution of 1 km is then established by inverting phase velocity maps of two modes. The thickness of the sediments is delineated by the impedance interface given by microtremor H/V (horizontal-to-vertical) spectral ratio. The model is in good agreement with tectonic unit. The sedimentary thickness of Daxing high and two sags located around Gantang and Xiadian are respectively 100-400 m and 400-600 m, which correlates well with the isosurface of S-wave velocity at 1 km/s. The model also presents some evidence on the extension of Daxing fault along NE direction.