Ever since the interest in organic environmental contaminants first emerged 50years ago, there has been a need to present discussion of such chemicals and their transformation products using simple abbreviations so as to avoid the repetitive use of long chemical names. As the number of chemicals of concern has increased, the number of abbreviations has also increased dramatically, sometimes resulting in the use of different abbreviations for the same chemical. In this article, we propose abbreviations for flame retardants (FRs) substituted with bromine or chlorine atoms or including a functional group containing phosphorus, i.e. BFRs, CFRs and PFRs, respectively. Due to the large number of halogenated and organophosphorus FRs, it has become increasingly important to develop a strategy for abbreviating the chemical names of FRs. In this paper, a two step procedure is proposed for deriving practical abbreviations (PRABs) for the chemicals discussed. In the first step, structural abbreviations (STABs) are developed using specific STAB criteria based on the FR structure. However, since several of the derived STABs are complicated and long, we propose instead the use of PRABs. These are, commonly, an extract of the most essential part of the STAB, while also considering abbreviations previously used in the literature. We indicate how these can be used to develop an abbreviation that can be generally accepted by scientists and other professionals involved in FR related work. Tables with PRABs and STABs for BFRs, CFRs and PFRs are presented, including CAS (Chemical Abstract Service) numbers, notes of abbreviations that have been used previously, CA (Chemical Abstract) name, common names and trade names, as well as some fundamental physico-chemical constants.
The aim of the present study was to model apparent serum half-lives of polybrominated diphenyl ethers (PBDEs) with 7–10 bromine substituents. Workers with occupational exposure to PBDEs have elevated serum levels of PBDEs, but these substances are also found in the general population and are ubiquitous environmental contaminants. The calculations were based on exposure assessments of rubber workers (manufactured flame-retarded rubber compound) and electronics dismantlers who donated blood during a period with no work-related exposures to PBDEs, and referents without any known occupational exposure (clerks, cleaners, and abattoir workers). The workers had previously been found to have elevated levels of high- and medium-brominated diphenyl ethers compared with the referent populations. We performed nonlinear mixed-effects modeling of kinetics, using data from previous and present chemical analyses. The calculated apparent half-life for decabromodiphenyl ether (BDE-209) was 15 days (95% confidence interval, 11–18 days). The three nona-BDEs and four octa-BDE congeners were found to have half-lives of 18–39 and 37–91 days, respectively. BDE-209 has a short half-life in human blood. Because BDE-209 is commonly present in humans in general, the results of this study imply that humans must be more or less continuously exposed to BDE-209 to sustain the serum concentrations observed. BDE-209 is more readily transformed and/or eliminated than are lower brominated diphenyl ether congeners, and human health risk must be assessed accordingly.
Humans and wildlife are exposed to an intractably large number of different combinations of chemicals via food, water, air, consumer products, and other media and sources. This raises concerns about their impact on public and environmental health. The risk assessment of chemicals for regulatory purposes mainly relies on the assessment of individual chemicals. If exposure to multiple chemicals is considered in a legislative framework, it is usually limited to chemicals falling within this framework and co-exposure to chemicals that are covered by a different regulatory framework is often neglected. Methodologies and guidance for assessing risks from combined exposure to multiple chemicals have been developed for different regulatory sectors, however, a harmonised, consistent approach for performing mixture risk assessments and management across different regulatory sectors is lacking. At the time of this publication, several EU research projects are running, funded by the current European Research and Innovation Programme Horizon 2020 or the Seventh Framework Programme. They aim at addressing knowledge gaps and developing methodologies to better assess chemical mixtures, by generating and making available internal and external exposure data, developing models for exposure assessment, developing tools for in silico and in vitro effect assessment to be applied in a tiered framework and for grouping of chemicals, as well as developing joint epidemiological-toxicological approaches for mixture risk assessment and for prioritising mixtures of concern. The projects EDC-MixRisk, EuroMix, EUToxRisk, HBM4EU and SOLUTIONS have started an exchange between the consortia, European Commission Services and EU Agencies, in order to identify where new methodologies have become available and where remaining gaps need to be further addressed. This paper maps how the different projects contribute to the data needs and assessment methodologies and identifies remaining challenges to be further addressed for the assessment of chemical mixtures.