An ionic liquid type imidazolium catalyst enhanced the conductivity of epoxy-anhydride resin based electrical conductive adhesives (ECAs) by more than two orders of magnitude compared with common imidazole compounds. Percolation growth dynamics study combining with epoxy curing kinetics results indicates that the enhancement of conductivity was attributed to the higher percolation efficiency within ionic liquid catalyzed ECAs. An “interphase layer” model was proposed to explain the percolation mechanism in the thermoset based conductive composite. The present work highlights the importance of cross-linking the polymer matrix with filler interconnections, and provides practical guidance on the control over percolation dynamics in conductive composites in order to achieve enhanced percolation conductivity.
1 December 2016 in Composites Science and Technology
Herein, we reported on the study of percolation dynamics in thermoset-based die attach (DA) materials and its effect on percolation conductivity. Two types of percolation mechanism in thermoset based DA were discovered, i.e., the curing reaction-induced percolation and the physical aging-induced percolation. The former features in a fast percolation network growth rate, which is one order of magnitude higher than the latter. It is demonstrated that the percolation kinetics largely affects the apparent percolation conductivity under the traditional packaging conditions; and reaction-induced percolation allows ultrahigh efficiency in reaching the volume fraction-limiting percolation conductance, resulting in enhanced thermal performance of DA.
Our present work showed that capillary force could induce a conductive network in a silver-epoxy composite by adding a small amount of secondary fluid for the filler volume fraction as low as 5%. The electrical conductivity was enhanced from 10-6 S/cm to 102 S/cm, transforming the polymer composite from insulating state to a conductive state. The thermal conductivity is improved by 2.5 times. Wetting properties such as wetting angle and interfacial tension between silver, epoxy and the secondary fluid were measured. A pronounced microstructure transition of filler network was also observed as the second liquid content gradually increased. With the aid of SEM-EDS analysis, the secondary liquid was found to be mainly distributed among the silver clusters and aggregates, which provided strong evidence to prove the existence of capillary bridging. These current findings not only provide a simple way to manipulate the conductive network formation, but also tremendously lower the consumption of silver flakes to the current 5 Vol%, which would bring a remarkable economic benefit to industry.