This study reports on a new one-pot copolymerization process by simultaneous oxidative disulfide and β-thioester formation by reacting bifunctional monomers, 3,6-dioxa-1,8-octane-dithiol (DODT) with diacrylates, poly(ethylene glycol) diacrylate (PEGDA) and 1,6-hexanediol diacrylate (HDODA), in the presence of N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), as the same base catalyst for both reactions, in air at room temperature with short reaction times. The resulting random copolymers consist of disulfide linkages between DODTs and β-thioester units formed by thiol-ene Michael addition click reaction. With a stoichiometric DODT/diacrylate feed ratio, diacrylate-telechelic copolymers are obtained in a single-step polymerization reaction. The Tgs of the P(DODT-co-PEGDA) copolymers are nearly constant at around −53 °C, while it decreases with increasing HDODA content in the P(DODT-co-HDODA) copolymers. Reductive degradation with thiols, such as 2-mercaptoethanol and dithiothreitol, led to chain scission via the disulfide–thiol exchange reaction. Treatment with NaOH solution resulted in further degradation by hydrolysis of the β-thioester units. These results indicate that these novel copolymers are fully degradable under mild conditions. This new process, applying simultaneous thiol oxidation and thiol-ene reactions, enables to prepare a large variety of sulfur-containing end-functional degradable copolymers useful for a broad range of advanced application possibilities.
This study reports on a new one-pot copolymerization process by simultaneous oxidative disulfide and β-thioester formation by reacting bifunctional monomers, 3,6-dioxa-1,8-octane-dithiol (DODT) with diacrylates, poly(ethylene glycol) diacrylate (PEGDA) and 1,6-hexanediol diacrylate (HDODA), in the presence of N,N,N’,N’’,N’’-pentamethyldiethylenetriamine (PMDETA), as the same base catalyst for both reactions, in air at room temperature with short reaction times. The resulting random copolymers consist off disulfide linkages between DODTs and β-thioester units formed by thiol-ene Michael addition click reaction. With stoichiometric DODT/diacrylate feed ratio, diacrylate-telechelic copolymers are obtained. The Tgs of the P(DODT-co-PEGDA) copolymers are nearly constant at around -53 °C, while it decreases with increasing HDODA content in the P(DODT-co-HDODA) copolymers. Reductive degradation with thiols, such as 2-mercaptoethanol and dithiothreitol, led to chain scission via the disulfide-thiol exchange reaction. Treatment with NaOH solution resulted in further degradation by hydrolysis of the β-thioester units. These results indicate that these novel copolymers are fully degradable under mild conditions. This new process, applying simultaneous thiol oxidation and thiol-ene reactions, enables to prepare a large variety of sulfur-containing endfunctional degradable copolymers useful for a broad range of advanced application possibilities.
Here, we report, for the first time, on a new class of sulfur-containing double hydrophopbic conetworks, poly(methyl acrylate)-l-poly(3,6-dioxa-1,8-octane-dithiol-co-poly(ethylene glycol) diacrylate) (PMA-l-P(DODT-co-PEGDA). Direct one-pot synthesis of acrylate-telechelic P(DODT-co-PEGDA) macromonomer in a gram-scale for the preparation of the conetworks was obtained by copolymerization of DODT with PEGDA via simultaneous oxidative disulfide formation and thiol–ene Michael addition click reactions. Conetworks with a broad composition range of 20–70 wt% sulfur-rich P(DODT-co-PEGDA) macrocrosslinker contents were obtained by radical copolymerization. High gel fractions and composition near to that of the feed ratios verified successful conetwork synthesis. DSC analysis indicates forced blending of the immiscible PMA and P(DODT-co-PEGDA) in the conetworks by one single Tg, which deviates from both the additive rule and the Fox equation for miscible blends. These novel conetworks exhibit high thermal stability up to ~300 °C and independent decomposition patterns of the components in two separate steps. The PMA-l-P(DODT-co-PEGDA) conetworks behave as organogels by swelling in organic solvents, such as THF, acetone, toluene, with composition dependent swelling degrees up to ~900%. Degradation by breaking the disulfide bonds with thiols followed by hydrolysis with NaOH led to complete disintegration of the PMA-l-P(DODT-co-PEGDA) conetworks. These findings enable establishing a new platform for the rational design of a variety of novel sulfur-containing functional and degradable macromolecular assemblies.