Yang Li

Dr. Yang Li


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 September 2026 in Construction Materials
Verified
Journal Article
Open access
PDF file
TPTao Peng
Tao Peng
DRDongxing Ren
Dongxing Ren
BLBinjia Li
Binjia Li
PXPeng Xue
Peng Xue
HLHongye Liao
Hongye Liao
YLYang Li
Yang Li
This study investigated sulfoaluminate cement grout intended for water-rich tunnel applications and developed machine-learning models for predicting its fresh-state properties. The experimental programme included a 31-mixture base series varying the water-to-binder ratio, Class F fly ash, steel slag, and polycarboxylate ether (PCE) superplasticizer dosage; a hydroxyethyl cellulose (HEC)-modified series with a fixed binder composition; and a static-water turbidity series used to evaluate particle dispersion resistance. Flowability, setting time, compressive strength, and turbidity were measured. The results showed that the water-to-binder ratio, fly ash, steel slag, PCE, and HEC affected the balance between workability, setting behaviour, strength development, and static-water dispersion resistance. Increasing the HEC dosage from 0.004 to 0.006 reduced turbidity by 84.1–94.7% under static-water conditions, whereas an HEC dosage of 0.007 reduced the 7 and 28 d compressive strengths by 51.5% and 40.7%, respectively. Machine-learning models trained on the 31-mixture HEC-free dataset provided exploratory predictions of flowability and initial and final setting times. Extra Trees, support vector regression, and Extra Trees gave the lowest nested leave-one-out cross-validation (LOOCV) errors for flowability, initial setting time, and final setting time, with R2 values of 0.819, 0.743, and 0.767, respectively. Shapley Additive Explanations (SHAP) analysis indicated that the water-to-binder ratio dominated flowability prediction, whereas fly ash contributed strongly to setting-time prediction. The results provide complementary experimental and data-driven evidence for comparing sulfoaluminate cement grout formulations within the investigated composition domain.

18 September 2026 in Construction Materials
Verified
Journal Article
Open access
PDF file
TPTao Peng
Tao Peng
DRDongxing Ren
Dongxing Ren
BLBinjia Li
Binjia Li
PXPeng Xue
Peng Xue
HHHai Huang
Hai Huang
YLYang Li
Yang Li
Anchors constructed in water-rich sandy-pebble strata require grout systems that can maintain material continuity and transfer tensile force effectively before groundwater-related disturbance weakens the borehole interface. This study investigated a sulphoaluminate cement-based rapid-setting grout (SAC) for PSB high-strength threaded anchors, using an ordinary Portland cement-based grout (OPC) as a reference material. Laboratory central pull-out tests were first conducted on grout cube specimens with different steel-bar diameters and bonded lengths to evaluate the steel–grout bond response. Full-scale field pull-out tests were then performed to examine the anchor–grout–ground response under water-rich ground conditions. LS-DYNA finite element models were calibrated against the laboratory and field results to interpret the governing load-transfer mechanism and to assess the influence of representative stratum resistance. The laboratory tests showed that the steel–grout bond response depended on both interfacial degradation and mortar splitting, indicating that peak bond strength should be interpreted together with failure mode and slip development. In the field tests, all anchors failed by pull-out, and the steel bar and grout body were pulled out together, showing that the full-scale response was governed mainly by the grout–ground interface rather than by steel–grout debonding. The calibrated numerical models reproduced the main load–displacement trends and supported a scale-dependent transition from steel–grout bond control at material scale to grout–ground interface control at field scale. The results provide a basis for evaluating rapid-setting grouts for high-strength anchors in water-rich sandy-pebble ground.