Improving the capacity of TiO2 semiconductors for visible light response is a key problem for utilization of solar energy in photo-catalytic degradation of organic pollutants. Both catalyst character and reactor conditions are important for the reaction efficiency. The fluorine ion doped TiO2/SiO2 catalyst was prepared by sol-gel method using HF solution as fluorine source. The activity test and UV–vis results indicated that this catalyst was superior to TiO2 P25 in photocatalytic oxidation of gaseous toluene under simulant sunlight irradiation due to the enhancement of visible and ultraviolet light absorbance. GC-MS results indicated that the main intermediates accumulated on active sites included benzoic acid, benzaldehyde, and phenol. A flat interlaid reactor was designed for continuous treatment of the stream with F-TiO2/SiO2 film. The results showed that coating the catalyst on the surface of both top and bottom glass substrates, through the knife coating method with an optimal reactor height, attained the highest efficiency. In addition, the presence of water and oxygen enhanced the oxidation of toluene due to the generation of hydroxyl radicals and peroxy radicals, respectively. The toluene oxidation rate increased with the increase in water vapor concentration in the range of 0~60 vol.%.
The organic pollutants discharged from industrial wastewater have caused serious harm to human health. The efficient photocatalytic degradation of organic pollutants under sunlight shows promise for industrial applications and energy utilization. In this study, a modified TiO2 photocatalyst doped with bismuth (Bi) and fluorine (F) and composited with SnO2 and SiO2 was prepared, and its performance for the degradation of Rhodamine B (RhB) under simulated sunlight was evaluated. Through the optimization of the doping levels of Bi and F, as well as the ratio of SnO2 and SiO2 to TiO2, the optimal catalyst reached degradation efficiency of 100% for RhB within 20 min under simulated sunlight, with a first-order reaction rate constant of 0.291 min−1. This value was 15, 41, 6.5, and 3.3 times higher than those of TiO2/SnO2, Bi/TiO2, Bi-TiO2/SnO2, and F/Bi-TiO2/SnO2, respectively. The active species detection showed that h+ was the most crucial active species in the process. The role of Bi and F addition and SnO2-SiO2 compositing was investigated by characterization. Bi formed a chemical bonding with TiO2 by doping into TiO2. The absorbance intensity in the UV and visible light regions was improved by SnO2 and F modification. Composite with SiO2 led to a larger surface area that allowed for more RhB adsorption sites. These beneficial modifications greatly enhanced the photocatalytic activity of the catalyst.
Accurate spatiotemporal prediction of PM2.5 concentrations provides technical support for urban air pollution warning and prevention. To address the insufficient prediction accuracy and high spatiotemporal training cost in existing approaches to large-scale PM2.5 prediction, this study applies a multi-criteria node importance evaluation system and a hierarchical greedy K-Means clustering algorithm to PM2.5 spatiotemporal modeling. First, air pollutant and meteorological data from 559 monitoring stations in southeastern China are selected for modeling, and feature enhancement is performed based on Improved Seasonal and Trend decomposition using Loess (ISTL). Second, the clustering algorithm divides stations into multiple station clusters. Subsequently, the node importance of each station cluster is calculated, with a topographic factor introduced for station importance modeling, and spatiotemporal prediction uses MCN-NIE-TCNTRANS (Multi-layer Clustering Node Partition and Node Importance Evaluation System-based TCN-Transformer model). Finally, cross-model comparison and ablation experiments are designed to evaluate model performance. Results show that the multi-criteria node importance evaluation system effectively improves the prediction performance of this model. Without a significant increase in spatiotemporal cost, it outperforms the suboptimal model, achieving a 1.92% increase in average R2 and a 3.07% reduction in MAE. This work provides a quantitative assessment and decision support for sustainable urban ecological development.