Bio-based production of materials from waste streams is a pivotal aspect in a circular economy. This study aimed to investigate the influence of inoculum (three different sludge taken from anaerobic digestors), pH (5 & 10) and retention time on production of total volatile fatty acids (VFAs), VFA composition as well as the microbial community during anaerobic digestion of food waste. The highest VFA production was ∼22000 ± 1036 mg COD/L and 12927 ± 1029 mg COD/L on day 15 using the inoculum acclimated to food waste at pH 10 and pH 5, respectively. Acetic acid was the dominant VFA in the batch reactors with initial alkaline conditions, whereas both propionic and acetic acids were the dominant products in the acidic condition. Firmicutes, Chloroflexi and Bacteroidetes had the highest relative abundance in the reactors. VFA generation was positively correlated to the relative abundance of Firmicutes.

Pharmaceutical residues, and other organic micropollutants that pass naturally through the human body into sewage, are in many cases unaffected by treatment processes at conventional wastewater treatment plants (WWTPs). Accumulated in the environment, however, they can significantly affect aquatic ecosystems. The present study provides an evaluation of a treatment system for the removal of pharmaceutical residues and other micropollutants. The system is based on a Membrane Bioreactor (MBR), including ultrafiltration (UF), followed by a biofilter using granulated active carbon (GAC) as filter material. It was found that all investigated micropollutants, such as pharmaceutical residues, phenolic compounds, bacteria and microplastic particles, present in wastewater, could be removed by the treatment system to below detection limits or very low concentrations. This shows that the combination of filtration, adsorption and biodegradation provides a broad and efficient removal of micropollutants and effects. The tested treatment configuration appears to be one of the most sustainable solutions that meets today’s and future municipal sewage treatment requirements. The treatment system delivers higher resource utilization and security than other advanced treatment systems including solely GAC-filters without biology.

Pharmaceutical residues, which pass naturally through the human body into sewage, are in many cases virtually unaffected by conventional wastewater treatment. Accumulated in the environment, however, they can significantly impact aquatic life. The present study indicates that many pharmaceutical residues found in wastewater can be removed with activated carbon in a cost-efficient system that delivers higher resource utilisation and security than other carbon systems. The experiment revealed a substantial separation of the analysed compounds, notwithstanding their relatively high solubility in water and dissimilar chemical structures. This implies that beds of activated carbon may be a competitive alternative to treatment with ozone. The effluent water used for the tests, performed over 20 months, originated from Stockholm's largest sewage treatment plant. Passing through a number of different filters with activated carbon removed 90–98% of the pharmaceutical residues from the water. This paper describes pilot-scale tests performed by IVL and the implications for an actual treatment plant that has to treat up to several thousand litres of wastewater per second. In addition, the advantages, disadvantages and costs of the method are discussed. This includes, for example, the clogging of carbon filters and the associated hydraulic capacity limits of the activated carbon.

In this study, we have taken the concept of water treatment by functionalized magnetic particles one step forward by integrating the technology into a complete proof of concept, which included the preparation of surface modified beads, their use as highly selective absorbents for heavy metals ions (Zinc, Nickel), and their performance in terms of magnetic separation. The separation characteristics were studied both through experiments and by simulations. The data gathered from these experimental works enabled the elaboration of various scenarios for Life Cycle Analysis (LCA). The LCA showed that the environmental impact of the system is highly dependent on the recovery rate of the magnetic particles. The absolute impact on climate change varied significantly among the scenarios studied and the recovery rates. The results support the hypothesis that chelation specificity, magnetic separation and bead recovery should be optimized to specific targets and applications.

Pilot tests as basis for the design, implementation and operation of a future full-scale oxidation plant completing the existing sewage treatment in Linköping, Sweden, were performed. Using an ozonation step between bio-sedimentation and post-denitrification processes, the primary goal was the removal of the highest priority substances to effluent water levels that will not cause adverse effects in the recipient considering the natural dilution. The study included initial emission screenings, dose control trials, treatment performance studies and eco-toxicity studies. At an ozone dose of 5 mg O₃/L, most substances could be removed. Ecotoxicological tests showed no negative effect for the tested ozone doses. High levels of oxygen into the denitrification could be rapidly reduced in the biology. The number of bacteria in the treated water could be significantly reduced even at relatively low ozone doses. Based on these results, the planning for the full-scale implementation of the treatment system was initiated in 2015.