Force chains are deemed as paths to transfer external loading in asphalt mixtures, and its properties difference can reflect the skeleton performances. In this study, the discrete element method (DEM) models of asphalt mixtures were established. Force chains characteristics of dense-suspended and dense-skeleton types asphalt mixtures were compared. Results indicate that force chains number of dense-suspended type asphalt mixtures is much more than that of dense-skeleton type asphalt mixtures. The force chains length shows exponential distribution for all asphalt mixtures. Fine aggregates are involved in transferring external loading, not just the role of filling. Compared with dense-skeleton types asphalt mixtures, dense-suspended type asphalt mixtures have more proportion of short length force chains. Although there are a large number of force chains in dense-suspended type asphalt mixtures, most of them have lower strength, especially for short length force chains. Comparing with the force chains of dense-suspended type asphalt mixtures, the force chains not only have longer length, but also higher strength for dense-skeleton type asphalt mixtures. The external loading is mainly transferred along the vertical direction, and a little loading tends to expand horizontally. The asphalt mixture skeleton structure has a smaller anisotropy degree that is beneficial to transfer external loading.
Asphalt–filler interaction plays a key role in the performances of asphalt mastic and asphalt mixture. However, the current studies ignore the filler critical volume fraction that has significant effects on asphalt–filler interaction ability. There is also lacking quantitative comparison of evaluation indices within filler critical volume fraction. In this study, two kinds of virgin asphalt binders and three kinds of mineral fillers were selected to fabricate asphalt mastics, and the dynamic shear rheological properties of virgin asphalt binders and asphalt mastics were measured, and the interaction evaluation indices complex viscosity coefficient Δη*, intrinsic viscosity [η], complex modulus coefficient ΔG*, K-B-G*, Einstein coefficient KE, L-A-δ and K-B-δ were quantitatively compared. The results indicate that complex viscosity coefficient Δη* and intrinsic viscosity [η] are not suitable for evaluation of asphalt–filler interaction ability. ΔG* and K-B-G* can evaluate the differences of asphalt and different fillers interaction ability based on the same kind of asphalt binder. Nevertheless, ΔG* and K-B-G* cannot differentiate the effects of asphalt binder on asphalt–filler interaction ability well. Although Einstein coefficient KE can evaluate asphalt–filler interaction ability, the Einstein coefficient KE is fitting results, and cannot distinguish the interaction ability under different filler volume fractions. L-A-δ and K-B-δ can differentiate the interaction ability of different asphalt binders and fillers well, and also the sensitivity factors of index K-B-δ are greater than L-A-δ. Therefore, K-B-δ is the most suitable for evaluating asphalt and filler interaction ability. Based on the evaluation index K-B-δ, asphalt–filler interaction ability increases initially and decreases afterwards with an increase in filler concentration within filler critical volume fraction.
15 June 2023 in Construction and Building Materials