Herein, the performance of a solar air heater (SAH) is experimentally investigated, utilising an array of tubes as the absorbent part. The study evaluates the impact of incorporating Al2O3-paraffin wax as a non-PCM storage medium in comparison to a traditional flat-plate solar air heater, specifically under Najaf-Iraq climate conditions. The SAH is positioned at an inclination of 32.1 degrees with respect to the horizon, allowing it to align optimally with the solar direction. The results reveal notable differences in thermal performance characteristics among the various models. The highest thermal efficiency values are observed for distinct configurations: the proposed model achieves about 55.2%, the wax-supported model reaches 55.9%, and the nano-PCM-reinforced model attains 57.7%, while the traditional model lags at 48.2%. Furthermore, an analysis of different air mass flow rates highlights a crucial finding. Specifically, an air mass flow rate of 0.01 kg/s results in a higher temperature exiting from the system compared to a flow rate of 0.02 kg/s. This is attributed to the extended interaction time between the passing air and the absorbing surface, facilitating enhanced heat exchange. Consequently, the system's thermal efficiency experiences an increase. The study underscores the superior thermal performance and efficiency of the tube array nano-PCM collector type under Najaf city-Iraq climate conditions.
Pure water is an essential element for human life and other living organisms, as well as for industrial and construction processes. Many technologies have been used to produce drinking water. Most of them depend on fossil fuels as an energy source, but due to the continuous rise in fuel prices, the phenomenon of global warming, the weakness of infrastructure in many developing countries, and other factors, renewable energy has become the ideal solution to be an energy source. In this study, the effect of air velocity on the internal vapor content and its relationship with the performance of a conventional single-slope solar still was investigated numerically by Comsol Multiphsics 5.3 software. It was found that the productivity of a solar still is directly affected by the air velocity directed towards the glass cover. The forced directed air works to cool the glass cover, which leads to an increase in the temperature difference between the turbid water layer and the transparent cover layer, which enhances the condensation rates of the vapor mass at the glass cover, thus increasing the yield rate. The results showed that the total productivity of fresh water increased by about 4.7%, 10.3%, and 16% when the air velocity on the glass cover was (1.5, 3, and 4.5) m/s, respectively, compared to 0.5 m/s.
2 September 2024 in Renewable Energy and Sustainable Development